Getting the wing mirror positions the same both sides

Hi,

How do I get the wing mirror positions the same for offside and nearside. I measured the side repeater lights very accurately for me, but they ended up looking out as due to being a GT40 any datum point is different for both sides eg light apertures different size so cannot use them as measuring point if that makes sense.
 
Hi,

I taped some tracing paper over the filler cap aperture and traced the aperture and marked the mirror position.

Turned over the paper on the other wing, matched the aperture and marked out the mirror position.

Frank Catt recommended the mirrors and suggested the position, just outside and forward of the filler caps.

Seemed to work very well - They were Sebring bullet type mirrors.

Good luck.

Now GT40less!
 
Back
Top