Head light install

Bill Kearley

Supporter
A new thread, yup. I would like some ideas and or part numbers re the fitment of front head lights, buckets, addjusters and such. Part numbers and fotos would be a great help.

Thanks
Bill
 

Randy V

Moderator-Admin
Staff member
Admin
Lifetime Supporter
Tom’s car is certainly a sterling example. Unfortunately, Tom is no longer with us...
 
Very sorry to hear that Tom is no longer with us, his pictures are very good and instructional, they have helped greatly and that's the way I will fit mine.

Don.
 

Bill Kearley

Supporter
Not good news at any time, to bad.
I have it done, clean up hole to fit the light, drill holes in frame and install 1/4 inch rivnuts, bonded the frame to fiberglass, mount rear frame to back side of light body ( steel body from Hella ) with small screws, I put a springs between the frames on a bolt for adj. from the rear. A tidy firm install.
 
Back
Top