Hi,
Just ten days before setting off to the LMC, I discovered I have massive clutch slip, particularly in 5th gear.
I checked thast there was free play on the slave cylinder pushrod, and it was free.
I've pulled out the transaxle, and other than an oily bellhouising, there appears to be no rubbing or clearance problems.
The clutch cover is marked 235CP6050-11 90.
The driven plate is only marked E B329L.
It is 228mm dia, with 21 splines, and 2 yellow spring, 2 blue spring and 3 grey springs.
It is 7.9mm thick.
Has anybody any ideas where I can source this.
The part number for the cover seems to equate to a Peugeot part, but I can't match up the driven plate.
All ideas much appreciated.
Time is running out!
Cheers,
Geoff.
Just ten days before setting off to the LMC, I discovered I have massive clutch slip, particularly in 5th gear.
I checked thast there was free play on the slave cylinder pushrod, and it was free.
I've pulled out the transaxle, and other than an oily bellhouising, there appears to be no rubbing or clearance problems.
The clutch cover is marked 235CP6050-11 90.
The driven plate is only marked E B329L.
It is 228mm dia, with 21 splines, and 2 yellow spring, 2 blue spring and 3 grey springs.
It is 7.9mm thick.
Has anybody any ideas where I can source this.
The part number for the cover seems to equate to a Peugeot part, but I can't match up the driven plate.
All ideas much appreciated.
Time is running out!
Cheers,
Geoff.