Hi Udo,
Take a look at cableshift.com based in Phoenix, Arizona. I've got this set up on my RCR GT40. It works well and is probably easier to fit than a rod shift.
Cheers
I didnt know that cableshift did an 01E shifter now,I had a look on their webpage and its not advertised. I have a modified 016 (audi 5000) cableshift for my 01E and it required a bit of modification to work reliably. Maybe its an RCR version
Roaring Forties have one I think. Even has the reverse lockout. Unless I am mistaken, which could be the case. Isn't the O1E a derivative of the 986 Boxster S box, which is also cable shift?
Yes, I had the original Audi 5000 shifter but couldn't get the 5/6 plane on the O1E box. Still 4th was good for over 140mph! Good enough for early testing! Over last winter it had to be sorted and Jim at Cable-shift with Fran Hall at RCR were very helpful in getting another set up sent to me in UK. This replacement gave more movement and enabled the extra 5/6 plane.
Cheers
Roger
Roger I had to do the same with my Audi 5000 shifter, you trim it a little and adjust the linkages to get enough throw,plus I had to make a reverse lockout. The RF shifter is really nice.
Hi Udo, contact Jim at CableShift in Phoenix, Arizona and he will quote you to supply the correct O1E cable shift. I had to do minor mods to the brackets to get them to fit and line up the cables but otherwise it was a good product.
Regards
Roger
Hi Udo, contact Jim at CableShift in Phoenix, Arizona and he will quote you to supply the correct O1E cable shift. I had to do minor mods to the brackets to get them to fit and line up the cables but otherwise it was a good product.
Regards
Roger