brisbane boy

[Pete]

Hi you all,

Nice forum here,plenty of good info

Must admit i have no current plans to own a gt40

I found your forum searching info on injection stacks for 302

Info here was best i have stumbled across,im playing with street cars,dont know V8s but must learn as have purchased 66 mustang which requires engine and trans

Your cars using 5sp with big gear spacing requires torque and revs so im in the right place guess.

My recipe will be compromised by budget but if i can get the theory in place at least i will be able to aspire to the correct recipe.

Must be EFI and old school appearance.

Thanks for having me and any "look at this post" messages more than wecome.

Cheers.Pete. ps,any requests for post stuff from here etc will be entertained. getting stuff from USA to here would be nice also.

 

[Jack]

Welcome to the forum Pete! Don't be hesitant to ask questions, lots of talent here.

 

[Gus Richmond]

Welcome Pete!
Good luck with the stang!!
Speak with Paul at Roaring Forties he has a compliant 4 barrel EFI / MoTec set up which will pass your car through ADR's.

Cheers, Gus.

 

[Craig White]

Pete, got to have respect for the 66 Mustang. Nice ride. Welcome to the forum.

I would recommend something like this for classic looking multi-throttle body injection:

Dynaformance Fuel Injection

It will have the right look for your Mustang.

Or this tyoe of setup for a cheaper alternative injection system:

Mass-Flo EFI, Inc., Mass Air Fuel Injection Systems!

Good Luck with it.

 

[Jim Cowden]

Welcome Pete

I would be looking at the Holley or Edelbrock CFI type 4 barrel(electronic carby) as Gus suggested.

Gus He wont have to worry about emissions or complying,it is a 66 model.