Axles for ZF in RCR GT40

Bill D · 10-31-06, 01:53 PM

I know there are others besides me that are using a ZF transaxle in their RCR GT40. Mine is set up for CV joints, but I can't seem to find anyone who can build me the axles and CV joints to connect the transaxle to the hubs.

Anyone?

Thanks
Bill D

Fran Hall RCR · 10-31-06, 02:02 PM

Bill,

call me......

Fran

Alex Hirsbrunner · 10-31-06, 02:05 PM

Hi Bill,

RCR is supplying the axles and CV joints for my Audi 01E as part of the "deluxe plus kit", so you may to check with Fran.

Thanks,

Al

Dang, that Fran is fast! don't get distracted while posting :-)

Bill D · 10-31-06, 02:06 PM

Fran
What do you want me to call you

Fran Hall RCR · 10-31-06, 02:17 PM

Sir.....

Bill D · 10-31-06, 02:18 PM

How royal!!!

Sir Fran Hall. Yep, it works

Fran Hall RCR · 10-31-06, 02:19 PM

I have been called Royal....but its normally followed by "pain in the arse"....

Frank Catt · 10-31-06, 02:26 PM

Fran, I presume your shafts carry 108mm CVJs, would you be prepared to sell units to non RCR users ? Frank

Fran Hall RCR · 10-31-06, 02:35 PM

absolutely no problem......and yes they are 108mm 930 turbo....CV's.
Axle lengths will be the only concern.........

Frank Catt · 10-31-06, 02:42 PM

Thanks Fran, do you have these at a standard length or individually made to order, Frank

Fran Hall RCR · 10-31-06, 02:47 PM

You need to let me know what length, as most are made custom.
I am going to remove some of the options we are currently trying to support ...as there are too many variables and too many single source parts to manufacture.

Ron Earp · 10-31-06, 03:10 PM

You guys doing the same for the 016? There are a number of us out there too that will need to buy shafts as well.

R

Fran Hall RCR · 10-31-06, 03:22 PM

yep!!!!!

Neal · 10-31-06, 04:27 PM

For those who don't have the RCR chassis Taylor Engineering is a good resource. Highly recommented. Hewland,Jerico,Redline Oil,Quaife,Tilton,driveline