Stephan E.

Supporter
Hello Fellows,

Were did the summer go? I was so busy with other things that the SLC took second seat. Here are some pictures from what I got done.

Nothing exiting. The typical problems on placing the A/C. As already done before me. The evaporator was inverted 180 Degree and the housing was shortened. New exit holes drilled. Now there is plenty of room and with the AN fittings and hose length, I can take this entire unit down in minutes without disconnecting anything. The servo valve found its place behind the fans in line with the heater hoses.
 

Attachments

  • Evaporator open.jpg
    Evaporator open.jpg
    721.1 KB · Views: 437
  • Evaporator inverted-2.jpg
    Evaporator inverted-2.jpg
    613.5 KB · Views: 538
  • Evaporator inverted.jpg
    Evaporator inverted.jpg
    797.7 KB · Views: 426

Stephan E.

Supporter
More updates

Here are my design efforts on the firewall.
 

Attachments

  • Fuel-cell compartment.jpg
    Fuel-cell compartment.jpg
    604.3 KB · Views: 385
  • Tank upper bracket-2.jpg
    Tank upper bracket-2.jpg
    372.7 KB · Views: 422
  • Tank upper bracket-3.jpg
    Tank upper bracket-3.jpg
    221.6 KB · Views: 403
  • Firewall-1.jpg
    Firewall-1.jpg
    349.1 KB · Views: 415
  • Firewall-2.jpg
    Firewall-2.jpg
    312.4 KB · Views: 355
Back
Top