Home Forum Gallery Support  
Register FAQ Advertisers Search Today's Posts Mark Forums Read

Go Back > >


RCR Forum - RCR40/SLC/917/Superlite Aero Sponsored by Race Car Replicas.

Thread Tools Display Modes
Old 25th December 2017, 04:51 PM   #1
Bigvx5's Avatar
United States
Join Date: Dec 2017
Location: Greer SC
GT40: None
Posts: 7
Question about high speed and the handling,safety,etc...

I’m wanting to build the SLC to break the 200 mph mark at some point.always been a goal of mine as I like speed.i would like to do this in the half mile challenge but understand that may be just wondering about how safe and how the car handles and responds at high speeds..anybody have any experience or input on the subject is appreciated...thanks Scott
Bigvx5 is offline   Reply With Quote
Old 25th December 2017, 08:03 PM   #2
Silver Supporter
United States
Join Date: Feb 2010
Location: dallas
GT40: SL-C
Posts: 469
Re: Question about high speed and the handling,safety,etc...

Should be doable. Just build a really good cage. Friend of mine's brother in law had a
2,000 hp Camaro that started doing cartwheels at 260 mph in the Texas Mile a few years ago. Fortunately he had spent about $20,000 on a good cage so he lived to tell the tale. I have to think the SLC has better aero than that Camaro.
dallas_ is offline   Reply With Quote
Old 27th December 2017, 12:42 AM   #3
Frank833's Avatar
Silver Supporter
United States
Join Date: Jul 2013
Location: Fairview, TX
GT40: SLC LS7/Graz
Posts: 216
Re: Question about high speed and the handling,safety,etc...

My car is setup for open road racing. Ive not done a real cage yet so am limited to a tech speed of 168. Have run it to 175ish in practice.

I have street tail, CF wing mounted back and high, front wheel vents, street splitter.

Last time outi cranked out a bunch of wing.

Car is VERY planted at speed. With 3.5 front 4 rear ground clearance (at rest), and 800f/900r Springs, car runs low enough at 150 to hit the road reflectors.

As currently setup, it does fave aero push at 150+, but its very manageable.

I would not hesitate to use the car for mile racing.

I think I would run race splitter, fender vents, street tail, no wing, 1 of rake, 900f/1000r Springs to start testing.
Frank833 is online now   Reply With Quote
Old 28th December 2017, 11:13 PM   #4
gt40rick's Avatar
Lifetime Premier Supporter
United States
Join Date: Jul 2003
Location: DFW, Texas
GT40: RCR40
Posts: 208
Re: Question about high speed and the handling,safety,etc...

Dallas, I was there when his Camaro rolled several times, his was the last run of the day and he was attempting to go faster than the Ford GT. As you say he had a very well built cage that saved him.

RCR GT40, '16 Z06 Corvette, Aston Martin Vantage, '70 Dodge Charger
gt40rick is offline   Reply With Quote
Old 29th December 2017, 09:43 AM   #5
Big-Foot's Avatar
United States
Join Date: Jan 2007
Location: Kenyon, MN
GT40: Gulf Cart
Posts: 6,604
Re: Question about high speed and the handling,safety,etc...

Make no mistake here —
You are never “Safe” in a car that’s running 200+ MPH - even if the car was built to withstand a crash to protect its occupants.
In some cases the rollcage itself may well become the instrument of severe injury or death.
Anyone who tells you differently is not telling you the truth.
Regards - Randy
-- Youth and talent are no match for old age and treachery!
GT40 RCR40 #45 G50-331-Weber IDAs ((Sold))
My build site:
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Big-Foot is offline   Reply With Quote

car, handles, high, responds, speeds

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

All times are GMT -4. The time now is 12:25 PM.