I NEED A SOURCE FOR MANDREL BENT 1 3/4 in EXHAUST TUBING

Radi of 2.5", 4" and 6" measured to the center of the tube. Will need source for multiple pieces of each.

try www.aircraftspruce.com
they have alot of this type of material.
another possibility is Speedway motors in Lincoln Nebraska.

oooops, here's their link http://www.speedwaymotors.com/

[ December 09, 2002: Message edited by: Alain Vanhollebeke ]

Alain: Are they prebent pieces or stock that can be bent? Can we have the tubing bent locally by a muffler shop? Thanks for your quick response. cb

they have prebent pieces in different shapes, such as "U" and "J" shapes.

I think aircraft spruce has stainless available too.

another link: http://www.magnumforce.com/ubend.asp

[ December 09, 2002: Message edited by: Alain Vanhollebeke ]

Try Headers by Ed at headersbyed.com. All they make are exhaust systems and components for same.

http://www.burnsstainless.com/index.htm top end racing stainless, aluminum, best selection, GOOD TECH ARTICLES

http://www.stainlessworks.net/
stainless, best prices, good selection


http://www.holley.com/HiOctn/ProdLine/Hooker.html
, limited stainless, lots of mild steel, including flanges, can be purchased through Summit

http://www.stahlheaders.com/index.html
mild steel only, big selection


https://ssl5.mysecureserver.com/bosstoolscom/store/store/comersus_dynamicIndex.asp
mild and very limited stainless, online only

[ December 10, 2002: Message edited by: Kalun D ]

[ December 10, 2002: Message edited by: Kalun D ]