Brake Bias Questions

M

Michael Fling

Supporter

• Mar 18, 2014

• #1

1. I purchased a brake bias adjuster. It is a standard 3/8-24. It appears our brake assembly has a larger bolt. Any suggestions for adaptation or do I need to find a non standard size?

2.The brake pedal assembly has a left and right mc. Is the right side preferred for the rear brakes?

 

Will Campbell

• Mar 18, 2014

• #2

The standard pedal set has a built-in bias bar. What did you buy, and why?

 

M

Michael Fling

Supporter

• Mar 18, 2014

• #3

Brake bias adjuster knob. A cable that typically attaches to the adjuster bar so that the bias can be adjusted from the cockpit while driving.

 

Doc Kaler

• Mar 18, 2014

• #4

Michael,

You may need this bias adjuster:

Tilton 72-508 : Tilton Remote Brake Bias Adjuster - Fits 3/8"-24 or 7/16"-20

It includes both the 3/8 and 7/16 ends to choose from.

 

Howard Jones

Supporter

• Mar 18, 2014

• #5

Here

Wilwood High Performance Disc Brakes - Pedal Assemblies Tech Tips


http://tiltonracing.com/wp-content/uploads/2013/07/98-1250-600-Series-Balance-Bars.pdf