Ross SLC first start
- Thread starter John Ross
- Start date
Ken Roberts
Supporter
I watched this earlier today......fantastic!
Will this intake setup fit under the back window John?
Will this intake setup fit under the back window John?
Yes, barely. The back corner of the CF cover hiding the linkage comes to within about 1/4" of the rear window.
JR
Michael Fling
Supporter
Sounds amazing! Congratulations, :thumbsup:.
Very nice. What is the plan for air filters?
Sounds great and that intake looks amazing.
Holley speed density. The plan for air filters is the wire mesh ones from that guy that took a break for a while.
Home - Bills B Racing
JR
Home - Bills B Racing
JR
WOW John really impressive. Mate with that 442 cubic engine and that cam you'll never have to get out of 2nd gear on suburban roads. My SLC with Ricardo doesn't really enjoy cruising in 4th gear at our suburban speed limit of 60kmh (44 mph) as the RPM is so low given the Ricardo's 'long' gears and that's only with the LS3/480hp. I managed 150kmh (111mph) in 2nd gear the other day and i still had room before redline.
Cheers
Stuart
Cheers
Stuart
Stu, your metric units must be different than the ones we use over here. 60 Km/H is about 37 MPH here, and 150 Km/H is about 93 MPH.
The suburban roads where I live have speed limits of 60 MPH (about 97 Km/H) and up. 70 MPH in 2nd is about 5050 RPM, so I'll definitely be using the higher gears...
JR
The suburban roads where I live have speed limits of 60 MPH (about 97 Km/H) and up. 70 MPH in 2nd is about 5050 RPM, so I'll definitely be using the higher gears...
JR
sorry John I got my maths wrong! I was using the hp to Kw equation instead. doh!
you'll easily get to 93mph in 2nd!
cheers
you'll easily get to 93mph in 2nd!
cheers
