Wheel Bearing Seals / Spindles

Has anybody ever had a problem with their wheel bearing retaining nuts coming loose? There is a retaining ring with a tab that fits into a slot on the spindle. I have had problems with mine and was curious how commonly the situation occurs. When this happens it usually trashes the wheel bearing sealing rings.

Thanks,
John
 

Rick Muck- Mark IV

GT40s Sponsor
Supporter
John,

There is a thread on here about that. I looked quickly but on my phone I can't it well. I'll forward the thread later.

Rick
 
John,
Several owners blue Loctite the screws. I also changed from button allen heads to hex head screws on the front ones to get better torque. Not sure hex head screws will clear things in the rear.
 
Back
Top