MK-I MK-II MK-III MK-IV GULF MIRAGE J-CAR LOLA
   | Notices | Hi member,
welcome to GT40s.com! If you've never posted on the forum maybe give it a go by introducing yourself in the Introduce Yourself Here forum. Also, think about becoming a Forum Supporter at GT40s.com. Becoming a supporter will allow you more PM space, an avatar, and the money is used to keep GT40s.com running.
Enjoy the forum!
Welcome to the GT40s.com, the World’s Largest GT40 resource.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, view pictures, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, Join Our Community Today!
Why not start with your first post today and become an active part of GT40s.com now! And, if you find you enjoy GT40s.com think about becoming a Forum Supporter. | | GT40 Tech - Exterior, Interior, AC, & Trim All that other stuff not in categories above. | 
09-27-06, 04:26 PM
|
 #1 (permalink)
| | ChrisMartino 7 Tenths 
Join Date: Nov 2003 Location: Toronto, Canada GT40: MDA Mk I
Posts: 753
Rep Power: 13  | Chassis 1010 Roof
Can anyone identify what this is on the roof? I thought it might be a vent for cockpit airflow but not sure.
Chris
__________________ Chris Martino
Raceline Digital
Historic Decals & Graphics for the GT40, Cobra and Cobra Daytona www.racelinedigital.com
1-888-857-1978
GT40 Mk I - Essex Wire #47
Last edited by ChrisMartino; 09-27-06 at 04:31 PM.
| 
|  | |
09-27-06, 05:17 PM
|
#2 (permalink)
| | Charlie Farley 2 Tenths 
Join Date: Sep 2005 Location: UK:East Anglia GT40: The 'Baby' has
Posts: 275
Rep Power: 6 | Re: Chassis 1010 Roof
Yea Chris,
Some over enthusiastic french bird's thong , collected on the roof during the practise lap. Dont worry, she wasnt a looker . | |
| | |
09-27-06, 05:32 PM
|
#3 (permalink)
| | Doc Watson 5 Tenths
Join Date: Feb 2005 Location: Devon, UK GT40: Replica Mk I
Posts: 515
Rep Power: 10 | Re: Chassis 1010 Roof
Its a roof vent which was a feature of both 1010 and 1026 throughout their racing carreers.
Also an aluminium cover was put over the rear deck from Sebring 1966 (26th March) and 1026 had a small aluminium extension over the rear wheel arches.
By Nurburgring 1966 (4th june) the rear bodywork had been replaced on both cars with wider ones but still incorporated the cover over the deck grille which had been painted with the body stripe.
Hmmmm.... might be a case of to much information there.....
Andy Watson
__________________
replica mono chassis
original rear clip
1966 289
48IDA's
This month its going to be red
'This car you have to be measured for...' | |
| | |
09-27-06, 05:45 PM
|
#4 (permalink)
| | john_douglass Bronze Supporter 
Join Date: Sep 2005 Location: Rockville, Md. GT40: KVA
Posts: 141
Rep Power: 5 |  Re: Chassis 1010 Roof
Chris,
I have something similar mounted on my roof - it's a rear view camera. I felt quite unsafe at not being able to see out my back window. So I bought a used third break light and mounted a camera in it - works pretty well.
John  | |
| | |
09-27-06, 06:38 PM
|
#5 (permalink)
| | ChrisMartino 7 Tenths
Join Date: Nov 2003 Location: Toronto, Canada GT40: MDA Mk I
Posts: 753
Rep Power: 13 | Re: Chassis 1010 Roof
Thanks guys - no such thing as too much info! As you know I'm trying hard to replicate #1010 and wanted to incorporate the vent, don't know how much added airflow it provides but I would image if it was useless, they wouldn't have done it? (ANY extra airflow would be great...)
If anyone has info or pics of this vent let me know, I would appreiciate it!
Cheers
Chris
PS: Thanks to Chris Melia for the color reference pic-
__________________ Chris Martino
Raceline Digital
Historic Decals & Graphics for the GT40, Cobra and Cobra Daytona www.racelinedigital.com
1-888-857-1978
GT40 Mk I - Essex Wire #47 | |
| | |
09-27-06, 06:42 PM
|
#6 (permalink)
| | Doc Watson 5 Tenths
Join Date: Feb 2005 Location: Devon, UK GT40: Replica Mk I
Posts: 515
Rep Power: 10 | Re: Chassis 1010 Roof
I got all that info from 'Ford that beat Ferrari' in the 'racing Teams' section of the book under Essex Wire there are a few shots of the vent.... if you dont have it i can email pictures of them to you.
Any shots of the thong would be welcome..........
Andy
__________________
replica mono chassis
original rear clip
1966 289
48IDA's
This month its going to be red
'This car you have to be measured for...' | |
| | |
09-27-06, 07:10 PM
|
#7 (permalink)
| | ChrisMartino 7 Tenths
Join Date: Nov 2003 Location: Toronto, Canada GT40: MDA Mk I
Posts: 753
Rep Power: 13 | Re: Chassis 1010 Roof
Thongs and photo's are welcomed! Whatever you have will help - I need to purchase that book!
Thanks Doc-
Chris
__________________ Chris Martino
Raceline Digital
Historic Decals & Graphics for the GT40, Cobra and Cobra Daytona www.racelinedigital.com
1-888-857-1978
GT40 Mk I - Essex Wire #47 | |
| | |
09-29-06, 06:57 PM
|
#8 (permalink)
| | ChrisMartino 7 Tenths
Join Date: Nov 2003 Location: Toronto, Canada GT40: MDA Mk I
Posts: 753
Rep Power: 13 | Re: Chassis 1010 Roof
Quick mockup with card stock, might make it a little more shallow in height. There are a lot of obstructions such as the frame and bulkhead beneath so the actual air vent opening will start approx 2.5 inches foward from the back of the clip. Adjustments and some more mockups to be done before I commit to cutting into the roof.
Chris
__________________ Chris Martino
Raceline Digital
Historic Decals & Graphics for the GT40, Cobra and Cobra Daytona www.racelinedigital.com
1-888-857-1978
GT40 Mk I - Essex Wire #47
Last edited by ChrisMartino; 09-29-06 at 06:59 PM.
| |
| | |
09-29-06, 08:07 PM
|
#9 (permalink)
| | Doc Watson 5 Tenths
Join Date: Feb 2005 Location: Devon, UK GT40: Replica Mk I
Posts: 515
Rep Power: 10 | Re: Chassis 1010 Roof
will get those photos to you tomorrow night.... looks good though......
Andy
__________________
replica mono chassis
original rear clip
1966 289
48IDA's
This month its going to be red
'This car you have to be measured for...' | |
| | |
09-30-06, 02:07 AM
|
#10 (permalink)
| | ChrisMartino 7 Tenths
Join Date: Nov 2003 Location: Toronto, Canada GT40: MDA Mk I
Posts: 753
Rep Power: 13 | Re: Chassis 1010 Roof
Thanks much Andy - info on this is very hard to find so I appreciate it!
Cheers-
Chris
__________________ Chris Martino
Raceline Digital
Historic Decals & Graphics for the GT40, Cobra and Cobra Daytona www.racelinedigital.com
1-888-857-1978
GT40 Mk I - Essex Wire #47 | |
| | |
10-02-06, 06:27 PM
|
#11 (permalink)
| | Doc Watson 5 Tenths
Join Date: Feb 2005 Location: Devon, UK GT40: Replica Mk I
Posts: 515
Rep Power: 10 | Re: Chassis 1010 Roof
Did you get them Chris?
BTW I've been doing some research on the thong but cant seem to find the exact Essex Wire red colour..... I'm still looking though ;-)
Andy
__________________
replica mono chassis
original rear clip
1966 289
48IDA's
This month its going to be red
'This car you have to be measured for...' | |
| | |
10-02-06, 09:00 PM
|
#12 (permalink)
| | ChrisMartino 7 Tenths
Join Date: Nov 2003 Location: Toronto, Canada GT40: MDA Mk I
Posts: 753
Rep Power: 13 | Re: Chassis 1010 Roof
Got em! Thanks Andy, I will look them over and see how close I am.
Ever seen a 'Victoria's Secret' catalog? 
Chris
__________________ Chris Martino
Raceline Digital
Historic Decals & Graphics for the GT40, Cobra and Cobra Daytona www.racelinedigital.com
1-888-857-1978
GT40 Mk I - Essex Wire #47 | |
| | |
10-16-06, 01:37 PM
|
#13 (permalink)
| | Doc Watson 5 Tenths
Join Date: Feb 2005 Location: Devon, UK GT40: Replica Mk I
Posts: 515
Rep Power: 10 | Re: Chassis 1010 Roof
any progress on the vent?
__________________
replica mono chassis
original rear clip
1966 289
48IDA's
This month its going to be red
'This car you have to be measured for...' | |
| | |
11-15-06, 01:53 AM
|
#14 (permalink)
| | Bronze Supporter
Join Date: Dec 2002 GT40: Ottawa, Ontario
Posts: 212
Rep Power: 8 | Re: Chassis 1010 Roof
Wow, Chris, your garage looks just like mine, is it a single...?
__________________
"When you're racing, it's life. Anything that happens before or after, it's just waiting..." | |
| | |
11-15-06, 01:14 PM
|
#15 (permalink)
| | ChrisMartino 7 Tenths
Join Date: Nov 2003 Location: Toronto, Canada GT40: MDA Mk I
Posts: 753
Rep Power: 13 |  Re: Chassis 1010 Roof
Yup - a single it is! It's actually not too bad if you get everything off the floor and don't need to crawl in and out of the doors too often. The bonus is it heats up quickly in the winter after I insulated it. Nice to work outside when the weather is better although that has it's distractions too.
Dr. Watson - the roof will be almost complete this weekend, the pics helped so my many thanks to you! My time management (if there is such a thing) hasn't rewarded me with much one-on-one with the car the last couple of months. But when it does - I'll be out there making more progress.
...and yes I'll post photo's!
Chris
__________________ Chris Martino
Raceline Digital
Historic Decals & Graphics for the GT40, Cobra and Cobra Daytona www.racelinedigital.com
1-888-857-1978
GT40 Mk I - Essex Wire #47 | |
| | |
12-25-07, 07:08 PM
|
#16 (permalink)
| | RichardH 2 Tenths
Join Date: Jan 2005 Location: Basyngstoches, Hampshire, UK GT40: GTD+
Posts: 241
Rep Power: 6 | Re: Chassis 1010 Roof
Just come across this thread. Any chance you can forward those pics on to me, Chris?
Anyone else know of any "peculiarities" with 1026?
__________________
RS built GTD+
Engineering Manager, trying desperately to find out how these things work! | |
| | |
12-26-07, 01:54 PM
|
#17 (permalink)
| | ChrisMartino 7 Tenths
Join Date: Nov 2003 Location: Toronto, Canada GT40: MDA Mk I
Posts: 753
Rep Power: 13 | Re: Chassis 1010 Roof
Hi Richard - I'll dig through my pics that Andy sent me as well as some I received from MDA Craig B. They'll give you a decent idea of size etc, although I never did find any close-up pics.
Chris
__________________ Chris Martino
Raceline Digital
Historic Decals & Graphics for the GT40, Cobra and Cobra Daytona www.racelinedigital.com
1-888-857-1978
GT40 Mk I - Essex Wire #47 | |
| | |
12-26-07, 01:58 PM
|
#18 (permalink)
| | RichardH 2 Tenths
Join Date: Jan 2005 Location: Basyngstoches, Hampshire, UK GT40: GTD+
Posts: 241
Rep Power: 6 | Re: Chassis 1010 Roof
Ta Chris - I have seen a couple of 40s with Louvre vents in that position, but nothing like that.
Are you going to the Classic next year?
__________________
RS built GTD+
Engineering Manager, trying desperately to find out how these things work! | |
| | 
LinkBacks (?)
LinkBack to this Thread: http://www.gt40s.com/forum/gt40-tech-exterior-interior-ac-trim/19383-chassis-1010-roof.html | | Posted By | For | Type | Date | | GT40s.com | This thread | Refback | 10-02-06 09:37 PM | |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | | | Thread Tools | | | | Display Modes |  Linear Mode | |
