We have now introduced a range of US spec kit packages.
Full details can be found at
Basic Component Package
Thanks
Andy
Full details can be found at
Basic Component Package
Thanks
Andy
Tornado US spec kits
- Thread starter Andy Sheldon
- Start date
- Status
Everyone,
At todays exchange rate the prices work out approximately to;
Standard = $12,715
Deluxe = $ 24,700
Deluxe Plus = $ 32,400
Thanks,
S<!-- google_ad_section_end -->
At todays exchange rate the prices work out approximately to;
Standard = $12,715
Deluxe = $ 24,700
Deluxe Plus = $ 32,400
Thanks,
S<!-- google_ad_section_end -->
Hi All,
As expected the Dollar is slowly gaining value against the British Pound.
So, at todays rates the US Spec kits are becoming an even better value!
Standard = $12,485
Deluxe = $24,205
Deluxe Plus = $31,807
Deluxe Component Package = $53,100
(Everything less the engine and battery, read chassis #875)
Cheers,
Scott
As expected the Dollar is slowly gaining value against the British Pound.
So, at todays rates the US Spec kits are becoming an even better value!
Standard = $12,485
Deluxe = $24,205
Deluxe Plus = $31,807
Deluxe Component Package = $53,100
(Everything less the engine and battery, read chassis #875)
Cheers,
Scott
Last edited:
Is this Mono or SpaceFrame ?
What Transaxle?
Chrome / Rose-jointed suspension?
Wilwood / AP Calipers?
180 Headers - Stainless?
Randy,
Spaceframe
UN1
Powdercoated & rubber bushed front, rose joints in the rear, except for the front pivot of the radius arms.
Wilwoods with integral cable P- brake
Mild Steel
Package contents can be viewed here;
Basic Component Package
Cheers,
Scott
Spaceframe
UN1
Powdercoated & rubber bushed front, rose joints in the rear, except for the front pivot of the radius arms.
Wilwoods with integral cable P- brake
Mild Steel
Package contents can be viewed here;
Basic Component Package
Cheers,
Scott
Last edited:
That's a pretty good deal if it's got all of that! It's a lot of the little things that add up.
The UN1 - I know very little about them since they're not common over here.. I presume that it's been properly rebuilt / prepared for service in a high torque application.
I've another pal who's looking and he wants to make some comparisons between 2 or 3 mfgrs..
I've sent him your link and a link to this thread.. He's not the most internet savvy though...
The UN1 - I know very little about them since they're not common over here.. I presume that it's been properly rebuilt / prepared for service in a high torque application.
I've another pal who's looking and he wants to make some comparisons between 2 or 3 mfgrs..
I've sent him your link and a link to this thread.. He's not the most internet savvy though...
WOW!
The US Dollar is now below 1.9 to the Pound.
Our USA Spec "Deluxe Plus Kit Package" is currently $31,000.
Cheers,
Scott
The US Dollar is now below 1.9 to the Pound.
Our USA Spec "Deluxe Plus Kit Package" is currently $31,000.
Cheers,
Scott
Scott, would you mind addressing Randy's question related to the UN1?
Specifically, is it fitted with limited slip and what kind of power limitations do you think it faces?
TIA for whatever info you can provide regarding this issue....
Doug
Specifically, is it fitted with limited slip and what kind of power limitations do you think it faces?
TIA for whatever info you can provide regarding this issue....
Doug
Certainly Doug,
The gearboxes are split, dissasembled, inspected and repaired as necessary using new parts, then they are built back up with new seals.
They are equipped with an open diff, LSD is an option, as is a single piece input shaft.
They will easily handle 350-400 HP as delivered.
With the single piece shaft or even better the six speed conversion, the sky is the limit.
Are you ready to place your order?
The dollar is up further in midday trading today.:thumbsup:
Cheers,
Scott
The gearboxes are split, dissasembled, inspected and repaired as necessary using new parts, then they are built back up with new seals.
They are equipped with an open diff, LSD is an option, as is a single piece input shaft.
They will easily handle 350-400 HP as delivered.
With the single piece shaft or even better the six speed conversion, the sky is the limit.
Are you ready to place your order?
The dollar is up further in midday trading today.:thumbsup:
Cheers,
Scott
The Dollar is now hovering 1.84 to the British Pound.
:thumbsup:
S
:thumbsup:
S
Hi Folks,
With the US Dollar now at strong 1.80 to the British Pound, kit prices here in the USA continue to fall almost every day :shocked:.
Our Complete Deluxe Component Kit (a GT40 in a box) is now an amazing $49,700!
Our USA Spec kits are currently exchanged as follows;
Standard = $11,703
Deluxe = $22,700
Deluxe Plus = $29,824
Please visit our website to view our comprehensive selection of kit packages as well as optional parts.
Cheers,
Scott
With the US Dollar now at strong 1.80 to the British Pound, kit prices here in the USA continue to fall almost every day :shocked:.
Our Complete Deluxe Component Kit (a GT40 in a box) is now an amazing $49,700!
Our USA Spec kits are currently exchanged as follows;
Standard = $11,703
Deluxe = $22,700
Deluxe Plus = $29,824
Please visit our website to view our comprehensive selection of kit packages as well as optional parts.
Cheers,
Scott
The dollar is now 1.78 to the Pound:thumbsup:
Almost $600 has come off the price of our most expensive package overnight.
Stay tuned .....
S
Almost $600 has come off the price of our most expensive package overnight.
Stay tuned .....
S
The US Dollar is now hovering @ 1.762 to the GBP.
Our Complete Deluxe Component Package (GT40 in a box) is now $48,600.
Cheers,
S
Our Complete Deluxe Component Package (GT40 in a box) is now $48,600.
Cheers,
S
What is the price difference substituting a mono chassis for the standard one?
-Will Parker
-Will Parker
Hi Will,
Carbon monocoque pricing has not been finalized for release yet, it will be in a couple of months....stay tuned!
Cheers,
Scott
Carbon monocoque pricing has not been finalized for release yet, it will be in a couple of months....stay tuned!
Cheers,
Scott
Thanks Scott. I was actually thinking more in terms of a steel mono as shown on the webiste.
Hi Will,
No worries.
The Steel mono is shelved at the moment due to the development of the C/F monocoque, as such the web page has not been updated.
If it was available, at todays exchange rate it would be about a $5700 option.
Hope that clears things up.
Cheers,
Scott
No worries.
The Steel mono is shelved at the moment due to the development of the C/F monocoque, as such the web page has not been updated.
If it was available, at todays exchange rate it would be about a $5700 option.
Hope that clears things up.
Cheers,
Scott
Last edited:
Go Dollar!!!!!!
1 GBP = $1.76
S
1 GBP = $1.76
S
Currently ....
1.00 GBP = 1.74 USD
:thumbsup:
1.00 GBP = 1.74 USD
:thumbsup:
wow!!!!!
The US Dollar is currently trading at four year highs against the British Pound.
$1.73 = 1 GBP
$47,700 buys a GT40 in a box.
$34,564 buys our Deluxe package.
Cheers,
Scott
The US Dollar is currently trading at four year highs against the British Pound.
$1.73 = 1 GBP
$47,700 buys a GT40 in a box.
$34,564 buys our Deluxe package.
Cheers,
Scott
- Status
