Gurney Eagle Valve Covers

[Tornado Sports Cars]

Gurney Eagle valve covers cast in Aluminium and to fit Ford 289, 302 and 351W cylinder heads along with any other with the same bolt pattern.
Eagle heads were fitted to perhaps the most well known Ford GT40, Gulf car 1075.
The cost is £295 per pair and they are supplied fully machined with all fixings.
Designed to accept push in type oil fillers and breathers or can be drilled and tapped for screw in fittings.
For further information email [email protected] or telephone 01562 820372.
Thanks

Andy

[Tornado Sports Cars]

Only a few remaining sets of covers are now available from the current batch due in the next week or so.

Get your order in now to avoid disappointment.

Thanks

Andy

[Tornado Sports Cars]

New batch just arrived

[Tornado Sports Cars]

There is another batch at the machine shop now.
Most are pre sold but there are a few sets remaining.
If you need a set order now to avoid disappointment.

Thanks

Andy

[Tornado Sports Cars]

Now in stock. Only 1 set remaining from this batch

Thanks

Andy

[Tornado Sports Cars]

Another batch is now in production. Most are pre sold but there are a few sets remaining. get your order in now to be sure to get a set.

Thanks

Andy

[Tornado Sports Cars]

Lastest batch are being casted at the moment.

If you need a set let me know as they will all be sold by the time they have been machined.

Thanks

Andy

[Tornado Sports Cars]

latest batch has just arrived and are now available for immeadiate delivery.

I have a feeling this may be the last batch we ever produce due to the time and hassle involved so if you need a set for a future project now is the time to order.

Most are already pre sold.

Thanks

Andy

[Tornado Sports Cars]

attached picture

[Tornado Sports Cars]

We have decided to run another batch due to the demand for these covers.

If you would like to order set let me know to get on the list.

Thanks

Andy

[Tornado Sports Cars]

Along with the Gurney Eagle covers we have now re introduced the Gurney Weslake covers.

The covers are designed to fit any Small Block Ford head that has a standard Ford fixing pattern.

Limited amounts of both covers are now available for dispatch from stock.

We can supply covers with oil filler and breather cap holes pre cut in covers at customers request in the required positions.

Holes are 1 1/16" diameter suitable for most push in fittings using a rubber grommet allowing the use of a flush fit oil cap needed for clearance in GT40 replicas.

All covers are supplied with a fixings pack.

Thanks

Andy

[Tornado Sports Cars]

Forgot to mention the internal height is 3 1/2" but if you need more height to clear rockers we have spacers available in various thicknesses.

Thanks

Andy

[Tornado Sports Cars]

Another batch of covers have just been completed.

Most are pre sold but there are a few sets still available so if you need a set be quick.

Not sure when another batch will be available.

Thanks

Andy

[Tornado Sports Cars]

Another batch has just arrived.

If you have been waiting a while they are now available again from stock.

Thanks

Andy