Pete Has It Running!
- Thread starter gsharapa
- Start date
Terry Oxandale
Skinny Man
Congratulations. Sounds good from the back, especially at just the right idle rpm.
Thanks guys.
This was the initial start up. Before any touching of the 44 IDF's. The spark advance was set to 8* for a smooth idle. This will go away because of the "hefty" stage 3 cam, after setting the advance to 36* - 40* total.
Yesterday I ran the engine more after syncing the carburetors. Now it has about 2 hrs on it and it is ready for some road testing.
I plan to do the A/F readings at my work because I do this without the muffler so I can read every single cylinder. (I need a dyno:uneasy
16 passes would not work at my home. I have cool neighbors, but that would be a stretch haha.
This was the initial start up. Before any touching of the 44 IDF's. The spark advance was set to 8* for a smooth idle. This will go away because of the "hefty" stage 3 cam, after setting the advance to 36* - 40* total.
Yesterday I ran the engine more after syncing the carburetors. Now it has about 2 hrs on it and it is ready for some road testing.
I plan to do the A/F readings at my work because I do this without the muffler so I can read every single cylinder. (I need a dyno:uneasy
16 passes would not work at my home. I have cool neighbors, but that would be a stretch haha.
