Thanks for the replies! I already have the panels shaped so I was hoping someone could do the turning with the bends already in place. I wouldn't need the pattern to go all the way around and onto the bottom side. I entertained the idea of doing it myself and read a few articles on how to do it...
Ah, I mean PORSCHE...Well, I found out the hard way that with the new forum format there's either no edit option or its very well hidden. I guess I'll have to proof read BEFORE I post. How inconvenient... :)
Kim
I'm in the build process of my RCR GT40 and I found my Porcshe G 50 52 transaxle reverse switch is not working. Upon investivation, I found the switch to function when I insert a pin in the end and pushed. I had an assistant place his finger on the pin in the reverse switch port in the transaxle...
I'm working out some of the final wiring on my RCR GT40 and need some info regarding the reverse switch. I have a G50 52 and I assume the reverse switch is the two connector fitting on the right side of the transaxle(inverted). Is this a normally open switch that closes when put in reverse...