kram350's latest activity

Those hose clamps on the 240’s are not stock. They should be a solid metal clamp. Another question is, what’s the deal on clear filter...

Is that last picture 1046?

I did notice different slot counts on the mount pictured. Dave, the mount you built has four, pictures posted in color have two. Four...

Looking for any info on: exact location of coil bracket on firewall, clamps used, etc... Thanks in advance

Hello Markus, saw you might have steering wheel centers? Thanks Mark

I found a good picture here, https://www.flickr.com/photos/kennyschabow/albums/72157623128486819 and attached picture. Have to figure...

Here are some pic's. The sizes are cast into the back also, machining of the centers are slightly different, one has stainless sleeves...

Came across a couple of magnesium wine glass wheels, 8 X15, same back spacing @ 4" +/-. One has GT40 cast into the front of the wheel...

Was talking to Dennis Olthoff about these, as I had thought for ease of spinner install too. He said they were for a spindle nut...

Thanks for that, helps

Any pictures showing locations of line routing, catch can(s),type of fittings used, etc... of the original crankcase venting system? I...

Thanks for the pictures. Any idea what these are, Lucas, Ford, etc...

On a MKII, where were the wiper fluid nozzles located and the reservoir? Thanks for any pictures and or info.

Thanks David

Thanks all. Just started looking.