Recent content by Tommy18

Hi Morten, that would be great if you could please. Thanks

Unfortunately Chris can only supply parts for a different type of Renault box which would involve swapping other parts to make it work. It also sounded like it would make the gearbox prone to failure. Thanks anyway Simon.

Essex uk. Happy to travel or cover postage. Thanks

Hi, I'm looking for a replacement 2nd gear and 1st and 2nd selector hub for my Renault UN1 gearbox. Tag number on the box is UN1013. Many thanks Tom

Hi, Thanks for your help. Its like a hesitation/missfire with popping/chuffing from the carbs. If I try to feather the throttle through its seems to go on for quite a while then it will suddenly clear and is great. It definitely clears quicker if you plant the throttle. I have attached the...

Good morning, So since my last message I have now had a rolling road session and yesterday did my first 160 mile round trip road test. Overfueling was cured by lowering the main jet to 160 and the car pulls like a train. I now have an issue with coughing and spluttering around 2 to 3000 RPM and...

Hi, so yes idle jets 70f10. Quick question. If the emulsion tubes have been changed do the float levels need to be reset? Thanks Tom

Hi Mike, I haven't checked but will tomorrow re the idle jets. Supplier said 70f10. Fuel pressure is 2.5psi at present. Thanks for the info on the emulsion tubes.

Hi Brian, thanks and yes I have read the thread and watch the videos.just struggling to get my head around it and thought peoples past experiences and knowledge could help me out

Thanks for your helpful replies. My carbs were bought from webcon uk and I'm assured the floats were set when the kit was built up. But who knows and if the problem persists I'll look into that. Just searching these pages and google and it seems no one tends to be running an f14 emulsion tube...

Hi, Im on a freshly rebuilt 351w with afr heads 10.5:1 compression and comp cam. My carbs are currently running 37mm chokes F14 emulsion tubes Main jet 175 Air correction 160. I've never ran the car on the road but just occasional starting and get on and off the trailer it seems very fuely...

Hi, My GT40 passed it's IVA test, second Time Lucky. On my certificate the tester explained to me that in the "year of first registration" box, he had to write the word used, as I have one used part (my engine). He also said it's out of his hands but the DVLA may give me a Q registration or may...

Hi Nick, No problem. Here's a couple of pictures to show so how it fits to the car and also the notch out for the starter. I have the part numbers for the oil pickup etc if you need them. Tom

Hi, cars in for iva in a couple of days and just sorted the last few bits. Whilst setting the headlight levels I can't seem to get the cut off angle on the drivers side. And I believe this is a fail. Its level but no cut off. Passengers fine. I've kindly been lent another light unit and its...

Hi, I used a Moroso. Part number Mor-20534. I Have a Renault box and it failed the starter so had to be modified slightly. Southern GT also. The cars currently on a ramp so I can take a picture tomorrow so you can see the fit. Pan/dipstick and gaskets all from Summit. Good service. Tom