rod

Another thread on 331 verse 347 and their comparison to standard 302 stroke/bore dimensions opened up the question of rod to stroke ratio. The question was asked (by Jac so I know this is a good question) which was the best ratio: 302= 1.696, 331=1.661, 347= 1.588 My guess is the...

I could use some help. I'm building a shifter and it would be very helpful if I knew how long the cabin shift rod extends into the sponson past the spherical bearing mounted on the firewall. Length from the firewall to the centerline of the forward U-joint of part 31. Maybe someone out there has...

Hi I have a RCR40 and need to source a single replacement steering tie rod. Anyone know who makes these? RCR website shows that they supply the whole rack and tie rods only. Its approx 10-11 inch long (depends where measured from) and has 1/2 inch thread. Thanks

Probably only a question Fran would know. What filler rod was used for TIG welding the chassis and tank?

I'm in the process of planning my mild street/track 289 build. I have the engine completely disassembled. While pulling the pistons I let one slip through my butter fingers and dropped it on the floor. It landed on one of the connecting rod bolts and bent the sucker. Now I either have to have...