Recent content by A-tomic

  1. A

    Chevron B16 Replica

    Bryan, Sent you an e-mail.My e-mail is still the same. Dave
  2. A

    WTB urgently 016 throw out arm+ bearing

    John, I don't know if you found your parts or not but you can try www.rockauto.com in the US. Look under 83 or 84 Audi. They still stocked seals and clutches with bearing. They also show a picture of the part with part number. you will be able to see what they have in stock. They will even...
  3. A

    Chevron B16 Replica

    Hi guys, Soon to be back working on the car. Bought a house with a great big shop at the back in Northern Ontario on Georgian Bay. Will be moving in mid Nov. All my junk will be there instead of in storage. Will keep you updated when start happening. Dave
  4. A

    Chevron B16 Replica

    I'm still kicking and hope to start the car again when I'm done with the lawyers and get my dad sorted out too. Dave
  5. A

    Good Moaning. Les Paul Guitar Anyone?

    Keith, Nice guitar eighties lawsuit with bolt on neck gotoh tuners but on the low end. I have a Yamaha SL450 from 84 from the same era set neck and a little over 10 lbs just as good as a gibson. Dave
  6. A

    Chevron B16 Replica

    The B16 is smaller and lower. Dave
  7. A

    Chevron B16 Replica

    On the brace in the second picture a threaded piece or bolt goes through to which a second spherical joint attaches. It mounted on a curved tube piece attached to middle of the door. A small tube at the end of the bend holds the spherical joint. The tube is 90 Deg to the bend. I hope this helps...
  8. A

    Chevron B16 Replica

    Mike, Here is a picture of the outer hindge .025" threaded spherical joint with locknut mounted in a plate. An eye mounted in the roof attached to the window support hoop glassed into the upper window opening. There are two braces welded on to this hoop and glassed into the cockpit section for...
  9. A

    Chevron B16 Replica

    Mike, I have been working on my home to get it ready for sale. I am going to look for some property outside the greater toronto area where I can get some property with a shop and go at this full time. Roger Andreason has taken back Chevron Cars LTD from Chris Smith and sent me an e-mail to see...
  10. A

    Chevron B16 Replica

    Hi guy's, I'm still here. I have not done much work on the car. Pulley's are cut for the engine and crank pulley machine but has to be broached for the woodrift key. I've had lot's going on that cuts into my build. My mother passed away on Friday, but she's in better place, Alzheimers...
  11. A

    ANZACS lest we forget !

    Don't forget you were with us too at Juno after the war to end all wars, 25 years later. Anniversary talks | Australian War Memorial Dave
  12. A

    name the aeroplane part 2

    How about HS-478 the instruments look dated late 60's early 70's and it's a twin and it's British. I was originaly thinking early Shorts Skyvan but the yolk's throwing me off. Dave
  13. A

    name the aeroplane part 2

    I'm taking a guess. Bristol Freighter
  14. A

    name the aeroplane part 2

    David, You got it. CF-101 here F-101 US (Voodoo) McDonnell CF-101 Voodoo - Wikipedia, the free encyclopedia
  15. A

    name the aeroplane part 2

    Guy's, It's American and we flew them, CF100 no after that. Mike it was made in your area.
Back
Top