bune's latest activity

Is there someone that know the effect of the bias. I have turned so that the front brake is most powerfull. but if I turn it two turn...

I just had the car on the weight with full fueltanks and it was 964kg I'm satisfied with that, but with only 20kw pr 100kg car , I...

I have now done lots of bleeding with pressure with vacuum and with help of my friend. And the pedal seems harder now. I also had a...

Me and my family are all free of the covid virus. We keep distance to most people.

Just a silly question Rune.... I have two bleed nipples on my APs, not sure what you have... Lesson learned bleeding both nipples:) Morten

Many good tips here, I may try them all. will come back when the brakes are free of air.

Light tapping on each caliper with a small hammer will dislodge air bubbles so they can be purged from the system. It works every time...

If you can rig a vacuum line onto the bleed nipple at the caliper, and stop in from pulling fluid from the master reservoir by slightly...

I bleed and bleed , use 2psi valves to prevent backflow , but the brakes did not pass SVA . I use 4 pot calipers all around and 3/4...

Done.

Could admin move this tread, I think it belongs in engines and transaxles.

When I had to get access to the clutch, I had to remove the bellhousing also had to almost remove the engine to. Reason for this is...

For all of you wondering what this was. I found the failure with clutch problem I believe. First , the ZF transaxle first was sitting...

I have done some research I used a 3/4 master cyl and this gave me 10mm travel on clutch fingers. PTT say 8mm is max travel. and when...

I have a 7.25 PTT dual cluch with organic lining. I use a Tilton reliese beaing 6000 serie, and a 3/4" master cyl. The cluch will not...