InfiniteReality's latest activity

Reinforce the actual metal brace for the tail. My nuts were spot welded and when tail was open a spot weld snapped which caused rest to...

I personally would consider ABS or booster if possible. The manual brakes don't inspire confidence when you're use to modern brakes, no...

I love the renderings, wish I could 5% of that. Brian, I had a 3D model I paid for (can't recall website). I'd be glad to share it...

OH - So the GREEN box is illustrating the "Available Space" that we could use for the vents as long as we allow for hoses. Here is a...

When to go slow down video so could grab I took HD video and slowed it down in editing. Not scope good but hopefully okay

Comet NEOWISE Took a few photos to document its appearance. It'll be back in 6766 years!

For what it's worth I measured my cranking amps at the starter with full load, was 88A for my LS3

I agree with Cam. I run 4" front and 4.5" rear clearance. However if you set the car unoccupied it will change when you get in. A simple...

Target ride height with 0.5-1.0” different front to rear, with rear being higher. I have 4” and 4.5” blocks that I slide under my car...

I knew this day would come soon, and now it’s here. I suspect 3D heads will be next, followed by a full block. A 3D block wouldn’t...

Brian, those tail lights won't be easy to blend because the back of the SL-C is flat whereas the C7 is curved. I'm completely reworking...

I'm still running forgestar caps, but plans to get something laser etched on aluminum to put over (or replace) Forgestar caps. Those 3D...

I have 3D printed center caps. I got them from a very helpful forum member. Looks very nice and fits perfect.

Back to working on the adjustable pedal box. I purchased a compact ACME nut from McMaster, but I realized that there was no pressure...

Still need to figure out noise in front end, keep switching gears on projects in the shop and need to focus on getting noise fixed on...