jac mac's latest activity

  • J
    Gee Whizz Howard, I'm 70, you really ruined my day.... :cool:
  • J
    jac mac replied to the thread IT LIVES.....
    I went to the Teretonga event yesterday, This car cleared out and ran away from allcomers-( very mixed bag of sports cars )- did not get...
  • J
    jac mac replied to the thread SLC 24 Howard Jones.
    Have you got a short 3/8"unc bolt in the hole at front of block that goes thru to the mechanical fuel pump pushrod, that could be your...
  • J
    jac mac replied to the thread IT LIVES.....
    Correct Russell.
  • J
    jac mac replied to the thread IT LIVES.....
    Looks like it did get out on the track, photo credit to Gary Talbot.
    • 84350297_2708078875911820_4787915372760137728_o.jpg
  • J
    jac mac posted the thread IT LIVES.... in The Race Track.
    Many of our more enduring members will be interested to know that both Russ Noble & his car are alive & kicking. Russ called in for a...
    • 84219818_10220699258618712_4770464684413288448_n.jpg
  • J
    No circlip or loctite on front wheel bearings of that type that Ive encountered in the past 55 years of twisting spanners, cups always...
  • J
    I would suggest that whomever made the hubs has machined them to wrong dimension, that brg cup should be a light press fit. You may be...
  • J
    jac mac replied to the thread Source for pre 1975 302 blocks.
    Well too much and the torque that comes with it might be a bit tough on the trans axle, common sense & a light pair of driving shoes...
  • J
    jac mac replied to the thread Source for pre 1975 302 blocks.
    You could extend your search to include the 351w engine, it was used by Alan Mann & Mirage at various events. Fits in the time frame...
  • J
    jac mac replied to the thread Big Block vs Small Block.
    Period correct for a MK2 would seem to dictate a FE of some description preferably with one or two 4bbl's, .... next question? Why does...
  • J
    jac mac replied to the thread Big Block vs Small Block.
    And what transaxle are you going to choose, pray tell,??? And why go iron block FE when you can get an alloy FE block & heads that will...
  • J
    jac mac replied to the thread Supervan.
    You could suggest that about most cars featured on this website..
  • J
    jac mac replied to the thread GT40 Manufacturers.
    Some might debate that 'some' of the recent builders tubs are not 100% original spec, when reverse engineering and with the equipment...
  • J
    jac mac replied to the thread J9, formerly J7A.
    Good question about the J7 Ive asked the same question about the J7 & one that I have yet to be given an answer with some substance...
Top