KENS80V's latest activity

  • KENS80V
    KENS80V replied to the thread Scandinavian SL-C build.
    Johan....Tick Performance now sells a module for the 2 pin alternator problem...
  • KENS80V
    Tick Performance now has a solution to the problem if the ECM doesn't provide a signal to the 2 pin alternator...
  • KENS80V
    KENS80V replied to the thread Graz Starter.
    Also for reference the Audi R8 battery has a CCA of approx 900.
  • KENS80V
    KENS80V reacted to Hoffkm12's post in the thread Kurt H (hoffkm) SL-C build thread with Like Like.
    Couldn't stay away from my engine so I fixed the rubbing bolt. It was interfering by about .140" I shortened the bolt about .250"...
  • KENS80V
    KENS80V replied to the thread Fat Larry's GTR Build.
    I think that is the car Ron McCall built for a customer recently. The unique shifter and side mirrors come to mind.
  • KENS80V
    KENS80V reacted to MasonS's post in the thread Mason’s Build: Superlite SLC with Like Like.
    Happy to report that my V10 is now singing (quite loudly) after a tricky 2 weeks of troubleshooting engine timing problems. After...
  • KENS80V
    KENS80V reacted to 407flyguy's post in the thread S2's Build Thread with Like Like.
    OH - So the GREEN box is illustrating the "Available Space" that we could use for the vents as long as we allow for hoses. Here is a...
  • KENS80V
    KENS80V replied to the thread Graz Starter.
    Just for reference......the Audi R8 has the battery in the nose and runs 2/0 cable to the engine compartment and then branches off to...
  • KENS80V
    KENS80V replied to the thread Anti-Lock Breaks System.
    The factory race car had the Bosch ABS system I believe. I'm installing a BMW ABS system from a 2003 M3. There are a few companies...
  • KENS80V
    KENS80V reacted to sswartz's post in the thread S2's Build Thread with Like Like.
    Brian, I assume you're asking about the green box immediately behind the door. If so, that illustrates the available space between the...
  • KENS80V
    KENS80V replied to the thread Mounting the Superlite emblems.
    Mason S did these for me...... The center cap had a slight dome shape while the emblem was flat. The second picture shows the center of...
    • IMG_4066.JPG
    • IMG_4067.JPG
    • IMG_1614.JPG
  • KENS80V
    KENS80V replied to the thread Ken's SLC build thread.
    Racelogic TC is no longer available. I picked up a second one shortly after they decided to no longer offer it. Sometimes they are...
  • KENS80V
    KENS80V replied to the thread Ken's SLC build thread.
    Others have successfully made a sensor mount on the CV cover. I had to mount two sensors on that side so chose my version instead. I...
  • KENS80V
    KENS80V reacted to Jkviper's post in the thread Joel’s SL-C Build Thread with Like Like.
    Time for the next update. This post focuses on the initial fabrication of the cooling tubes. In an earlier post I mocked up the cooling...
  • KENS80V
    KENS80V replied to the thread Metric AN fittings.
    You'll be going around in circles unless you show us the exact lines you want to replace. The hoses you want to replace may not even...
Top