MotorEddy's latest activity

  • MotorEddy
    MotorEddy replied to the thread the right braking system.
    Ah...of course. My description only works of the calipers have same-sized pistons. If you're using calipers with differently-sized...
  • MotorEddy
    MotorEddy replied to the thread AEM Pumps.
    I thought you'd be using a couple of low-pressure pumps (one per main tank) to feed the swirl pot, then one of these:- from swirl pot...
  • MotorEddy
    MotorEddy replied to the thread the right braking system.
    Yebbut....imagine if PaulBav removed the entire upright & brake assembly and moved it to the opposite side of the car. The caliper would...
  • MotorEddy
    MotorEddy reacted to Paulbav's post in the thread the right braking system with Like Like.
    For clarity at least one of us has it correct...
  • MotorEddy
    MotorEddy reacted to Paulbav's post in the thread the right braking system with Like Like.
    Here are some slightly clearer photos... 295mm disc iirc and certainly do the job, same front and rear.
  • MotorEddy
    MotorEddy replied to the thread the right braking system.
    I think the AP CP5040 / CP5200 family fit inside a 15" wheel, and have been widely used on replica GT40s. Here's a drawing with...
  • MotorEddy
    MotorEddy replied to the thread Stéphane GT40 French Build.
    Does my schoolboy French fail me, or is an 01E called a "box of speeds"? I shall never refer to a gearbox as anything else from now on.
  • MotorEddy
    MotorEddy replied to the thread Cheshire SGT build.
    I'm in exactly the same position as you, and discovered the obsession with perfection was actually stopping me from making any progress...
  • MotorEddy
    MotorEddy replied to the thread Cheshire SGT build.
    I think that your eye is drawn to them at the moment, partly because you have been concentrating on profiling that panel around the weld...
  • MotorEddy
    MotorEddy reacted to Eddw5493's post in the thread Cheshire SGT build with Like Like.
    Once again guys not a massive update but makeing good progress sure your all finding my panel pics a bit dull now haha :D but will be...
  • MotorEddy
    MotorEddy reacted to Doc Watson's post in the thread Make the Noise!! with Like Like.
    MAKE THE NOISE!!!!
  • MotorEddy
    MotorEddy reacted to st harry's post in the thread Hello from germany with Like Like.
    Hello. I am from germany near Nürburgring.....My english is desaströs:D but in germany its nothing whit GT40......i have a 911 ST2.5 and...
  • MotorEddy
    Excellent film, go see it without and form of pedant hat on and enjoy it for what it is.....a great film filled with GT40’s and Cobras...
  • MotorEddy
    MotorEddy reacted to Eddw5493's post in the thread Cheshire SGT build with Like Like.
    Quite a few suggestions about leaving a few of the panels off to do all that work think im planning on doing a bit of a test run with...
  • MotorEddy
    MotorEddy reacted to gsharapa's post in the thread Engine Bay Picture Requests.... with Like Like.
    My Ford 408 Stroker...
Top