Thanks Paul
To be honest, the wiring would have ended up a right mess if I'd been drinking real beer:)
I found there is quite a lot of useable room next to the steering column on the Tornado. it means getting on your hands and knees to check fuses but probably like that wherever you put them.
Hi all.
It's been a while since the last update but I've done plenty on the car.
I spent Christmas designing and making the wiring loom. Not too bad a job as I did most of it in front of the telly watching christmas films and drinking beer.
I've made a fuse and relay panel that fits nicely up...
Hi Ian
You're right the facet pumps don't have them built in. On my system there are two inline one way valves on the inlets to the facet pumps.
Hi Keith
I found out the three way valve is rated at 30psi. As it will always be open one way or the other with nothing to restrict the flow there...
Hi Keith
I couldnt find a rating on the valve either but it's going to be in the return line so shouldn't be too high. I sent an email to the suppliers a while ago but not heard anything back yet.
Hi Keith.
The Tornado ones I've seen (I'm guessing yours are different) have a welded arm on the end which is going to make fitting them awkward. Worst case I'll just have to remove the panel and refit
Hi James
I found a 3 way valve on Ebay that I'm hoping will do the job.
These seem to be a realy hard part to find.
3 Way Fuel Solenoid Valve 12v SVO WVO Bio Diesel | eBay
Jason
Hi Keith
Winter projects will be:
Finishing fitting the body. I've got a screen on order, as soon as I've got that I can trial fit it and make sure everything lines up.
I've got all the clocks ordered so dashboard will probably be next.
I've also got the anti roll bars to fit. Going to be a...