Hi All, I m hoping you GT40 chaps can help out a Chevron enthusiast. I've only got 200bhp so I'm thinking an 01x will be fine but does anyone have an 01x bolt pattern drawing so I can make a plate to a Ford Duratec 2.0. I've seen a drawing for an 012 but although it looks similar after inputting it in to a cad program its not the same as the 01x I have. I could measure it but I'm hoping for an official drawing, I already got a Ford drawing.
Chevron B8 01x
- Thread starter G de Looze
- Start date
Ian Anderson
Lifetime Supporter
Reach out to Chris on here he is Flatchat, search for his posts or send him a pm.
Ian
Ian
I purchased an Adapter Kit FORD to AUDI 01E from Chris/Flatchat for my SBF to AUDI 012, works well.
All holes lines up except 1 that need a re-drill as the OIE/012 had different Dowel Positioning holes.
I believe his kit is multi-fit across the early AUDI range.
I read that the O1X/O1E were used in the same model run.
All holes lines up except 1 that need a re-drill as the OIE/012 had different Dowel Positioning holes.
I believe his kit is multi-fit across the early AUDI range.
I read that the O1X/O1E were used in the same model run.
Thanks, Ive started from scratch on this one as several holes clash with the Duratec so ive had to clock it over 3deg. Initially my problem was that several of the 01x holes were not in the same place as the 012 drawing found on this site.
