Bryan's RCR40

pattersonlee said:

Bryan - was your car an open top? I see the windscreen installed but no center spider?

Click to expand...

JP Verweij said:

Brainf, Capri's & Gt40's, a perfect combination.
Capri & Bubble arches are very seldom seen.
My V8 Supercharged with Bubble's
View attachment 122384

View attachment 122385

Click to expand...

otto69 said:

Sorry Bryan, but gotta ask JP it that’s a Super Roo on the front of the Capri ?

Clayton

Click to expand...

JP Verweij said:

Yes it is.

Click to expand...

bryanf said:

Here's how I set up my clutch release.
Fork and shaft are ZF parts from RBT.
McLeod 16525 Pantera adjustable release bearing and collar.
Girling 64673467 slave cylinder.
Lever arm from Bob Wood at Safir.
Quaife E62G1121 bellhousing.

View attachment 116705

View attachment 116706

View attachment 116707

Click to expand...

RdstrRod said:

Bryan, was the Bracket & Return Spring on the Clutch Actuating Arm something you added on your own, or was it purchased from somewhere? I have that same Slave & Arm from Safir but not the Spring & Bracket.
Rod

Click to expand...

bryanf said:

I made the bracket from stainless steel and used this spring:

https://www.amazon.com/gp/product/B07NRGZVZT/

Click to expand...

84Venom said:

So I'm confused. Did you sell the car before completion? If so, why?

Click to expand...

bryanf said:

The fuel tanks:
View attachment 108720

Front:
View attachment 108721

Rear:
View attachment 108722

Click to expand...

CobraGuy said:

Hey there, what did you end up using the fitting closest to the fuel inlet side for?

Click to expand...

bryanf said:

A vent valve just like the one in the last photo in this post:
https://www.gt40s.com/threads/bryans-rcr40.52988/post-553672
So a total of four of those.

Click to expand...

CobraGuy said:

Thanks!

Did you have a fuel return line installed or did your system not require it?

Click to expand...