It wasn't when I sold it, but it is now.Bryan - was your car an open top? I see the windscreen installed but no center spider?
It wasn't when I sold it, but it is now.Bryan - was your car an open top? I see the windscreen installed but no center spider?
Brainf, Capri's & Gt40's, a perfect combination.
Capri & Bubble arches are very seldom seen.
My V8 Supercharged with Bubble's
View attachment 122384
View attachment 122385
Yes it is.Sorry Bryan, but gotta ask JP it that’s a Super Roo on the front of the Capri ?
Clayton
Yes it is.
Bryan, was the Bracket & Return Spring on the Clutch Actuating Arm something you added on your own, or was it purchased from somewhere? I have that same Slave & Arm from Safir but not the Spring & Bracket.Here's how I set up my clutch release.
Fork and shaft are ZF parts from RBT.
McLeod 16525 Pantera adjustable release bearing and collar.
Girling 64673467 slave cylinder.
Lever arm from Bob Wood at Safir.
Quaife E62G1121 bellhousing.
View attachment 116705
View attachment 116706
View attachment 116707
I made the bracket from stainless steel and used this spring:Bryan, was the Bracket & Return Spring on the Clutch Actuating Arm something you added on your own, or was it purchased from somewhere? I have that same Slave & Arm from Safir but not the Spring & Bracket.
Rod
I made the bracket from stainless steel and used this spring:
I sent you a private message.So I'm confused. Did you sell the car before completion? If so, why?
Hey there, what did you end up using the fitting closest to the fuel inlet side for?
A vent valve just like the one in the last photo in this post:Hey there, what did you end up using the fitting closest to the fuel inlet side for?
A vent valve just like the one in the last photo in this post:
https://www.gt40s.com/threads/bryans-rcr40.52988/post-553672
So a total of four of those.
No fuel return line.Thanks!
Did you have a fuel return line installed or did your system not require it?