Search results

  1. Bryan koehler

    Bryan's GT-Forte build

    I welded up the middle rail section some time back in january. Then i had to take a break from the build to remodel the house. Hopefully i will get back to working on the 40 over the summer. No other real progress at this time. I did buy a Tig for Christmas butt its still in the bag havent even...
  2. Bryan koehler

    Posting Pictures

    Welded up the middle section. A while back. Got real busy remodeling house. Hopefully will be able to get back to this project. I bought a everlast tig butt havent even had a chance to plug it in and try it ou
  3. Bryan koehler

    Posting Pictures

    What can i do to get the orientation of my photos right? Is there a rotate function every time i post a photo its side ways. Ive been using a galaxy note 8
  4. Bryan koehler

    Bryan's GT-Forte build

    Hey charlie i used 2x6 for the frame with 2x12 at one end which is actually the middle of the table. Below the table is storage and im using 3/8 ply there. The top is two layers 1 layer of MDF 4x8 and then melamine 4x8 both are 3/4 inch thick if i remember right. If i did it over i would just...
  5. Bryan koehler

    Bryan's GT-Forte build

    Mike, bill, or nick how can i rotate the pictures i post???? There all sideways and i cant seem to find a rotate function ??
  6. Bryan koehler

    Bryan's GT-Forte build

    Thanks nick , I bet it does. Im actually working on the middle section now. Im following your build in the order of how you assembled the sections together. Although i weld out the entire frame each time i add to it and grind the bottom flush each time. So far its staying pretty flat. just takin...
  7. Bryan koehler

    Bryan's GT-Forte build

    And here are a few more which bring me to my current state of progress.
  8. Bryan koehler

    Bryan's GT-Forte build

    Here are a couple pictures of some of the tubes that came in the laser cut flat pack
  9. Bryan koehler

    Bryan's GT-Forte build

    I purchased a Gt forte laser flat pack at the end of 2017. after looking over what i recieved and the instructions Darrin George sent me i began the journey to build my GT-40. I've decided to start a thread here to gather as much help and advice as i can. my first role of buisness to do was...
  10. Bryan koehler

    Anyone having issues with GT Forte?

    Thanks bob i sent them a e mail asking them to check your order and compare to what i need and for a shipping quote to Texas USA. Darrin finally e mailed me back and is working on finishing up my original order. On the panel set he said he used that money for shipping. So i agree shipping was...
  11. Bryan koehler

    Anyone having issues with GT Forte?

    So i ordered the flat pack, the chassis panel kit, and a lasercut profiles kit. This was back last october. I gave Darrin 3 months to deliver. As we agreed in the begining. And he did indeed send me the flat pack and the laser profiles kit. Or atleast the majority of that. I never have recieved...
  12. Bryan koehler

    FS USA Power Wiper Kit

    I want to buy this windshield wiper. Do you still have it available? Bryan Koehler
  13. Bryan koehler

    Nicks Forte Scratch Build

    subcribed sent a private message sure like to hear your opinion on the gt forte. Thanks for posting this build
  14. Bryan koehler

    Chassis plans

    Have you considered gt forte flat pack? Its priced resonably and includes plans. Im considering this approach. Any insite on this idea is much appreciated as im thinking about placing my order as gt forte has a winter special on it right now.
  15. Bryan koehler

    James' GT-Forté scratch build GT40 MkI

    Thanks for posting. Nice build. Hope to see more .
Top