Search results

  1. D

    What‘s that noise?

    On my SPF, I noticed that as soon as I switch on the electric main switch, there is a low whining noise coming from the front of the car. It’s not the fuel pump, they are on a separate circuit. Not the coolings fans. It sounds like a small pump or electric motor, or somethin alike. It‘s not...
  2. D

    Gas Springs for Rear Clip

    Hi Markus, Did you find any new struts? Since I live in Europe (Luxembourg) as weil, I‘m trying to find an alternative over here.
  3. D

    SPF, clutch stop and dead pedal

    While I was "in there" moving my pedal box, I noticed that it hat a spare hole just left of the clutch, that could be used to attach a dead pedal. But I also wanted a clutch stop. After some thought I got a girder clamp out of my "I'm gonna need this some day" box, some M8 and M10 threaded...
  4. D

    Help with connecting my SPF A/C

    Thanks a lot Rick!
  5. D

    Help with connecting my SPF A/C

    Can any one else help please? I don‘t want to fry my A/C by connecting the wrong terminals.
  6. D

    Need new boots for steering rack on my SPF

    Just noticed one of the rubber boots is torn. I seem to remember that SPF uses an MG steering rack. There is a label on it but all I can read is « made in Argentina ». The number has worn of. Can anyone tell me which boots will fit.
  7. D

    Help with connecting my SPF A/C

    No iI already looked there as well. I know the 2 wires I pulled out (pink and purple/white). I just need to know which 2 of the 4 spade terminals I need to plug them back into. I guess the other 2 remain empty since I don’t have any other open wires lying around. These are the wires btw
  8. D

    Help with connecting my SPF A/C

    I was moving the pedal box and managed to pull two wires off the A/C evaporator. From Blas‘ wiring diagram they are for the A/C thermostat. The proble is, the connector has 4 spades and I have 2 cables. I suspect it‘s the bottom (shiny ones) but I‘m not sure. Can someone help me out?
  9. D

    Which Wilwood clutch master cylinder for an SPF?

    Thanks, it doesn’t have tge number but the diameter. I’ll go for a .625
  10. D

    Which Wilwood clutch master cylinder for an SPF?

    I just moved the pedal box on my SPF forward. Not a fun job, even when accessing it through the front. While I was in there ;literally), I noticed that the clutch cylinder has a small leak. I can just about make out the Wilwood name on it, but not the number. Does anyone have the type so I can...
  11. D

    Help me researching the history of my SPF

    Could someone post the information or is that copyrighted and I will have to buy the book? And if so, where can I get it from and which edition is the last one? Number 4 , if I'm not mistaken? Thanks! Dan
  12. D

    Help me researching the history of my SPF

    Hi guys, I am currently researching the history of my SPF GT40 MK1 I know that car was built by the old Dynamic Motorsports from Ohio in 2008 or 2009. The Chassis number is 2208 and it was registered in the States as a 1965 Ford GT40 under VIN GT40P1035. Unfortunatly, the rest ofthe...
  13. D

    ICan’t find the "How to" nor the "Superformance" subforums

    As I’m waiting to finally take delivery of my SPF (i’m starting to hate trudking companies) I’ve been going through the wealth of knowledge on here. And I’ve been reading lots of older posts mentionning a "how-to" section and an SPF sub-forum. But I can?t find it anywhere. Can someone help...
  14. D

    Stanceworks lift on an SPF anyone?

    Yes it does seem like a neat solution. I was wondering if the standard coil springs can be kept or need to be replaced by a shorter type.
  15. D

    Stanceworks lift on an SPF anyone?

    That’s a hefty price 6k. Especially since my car has a working suspension that I’m fine with. I’m just looking for a front lift to help me negotiate speed bumps and ramps and saw Stanceparts mentionned a few times on here but nothing concrete about an installation in an SPF. Just realized I...
  16. D

    Stanceworks lift on an SPF anyone?

    Hi guya, Has anyone installed a Stanceworks air lift kit on an SPF? I’m looking for advice and experiences (good or bad). Will I need to replace the front springs? Is the front kit enough or should I do all 4 wheels? is there room for the pressure tank anywhere or is the kit without tank...
  17. D

    SPF MK1, what needs to / should be done?

    My bad. How can I check whether this is installed on my car? Do you have any details about this fix? Is this kit still available?
  18. D

    SPF MK1, what needs to / should be done?

    I read somewhere about a relay fix kit for the radiator fans, but I can‘t find it on the SPF homepage nor any details about it on here. can someone help?
  19. D

    SPF MK1, what needs to / should be done?

    I’m taking delivery of my MK1 (chassis 2208). The car was built in 2008 by Dynamic Motorsports in Ohio, the engine comes from Performance ENgineering. The previous owner has done some work to adress issues with the engine, but otherwise the car is pretty much factory issue. I live in...
  20. D

    Original bits II

    Do you have a link to a shop selling them?
Top