Search results

  1. P

    Fuel Vapor/ Venting

    What are you guys using for a tank/filler venting? Back into the i take with a filter/valve? Charcoal canister? I am asking for an LS swapped Lotus Esprit - but nothing stock is left for either the car or the donor. Thanks!
  2. P

    Gonna do it. Lotus Esprit SBF.

    Great Project Cliff- not sure how i missed it before. I am LSing my 88 currently.. yes, i went the easy route with the heavy chevy. The rear brakes were a PIA and im still not convinced i did the right thing... im cutting axles currently. Keep those updates and pics coming! I could use some...
  3. P

    01x Inner CV sizing or measurements needed

    Got some awesome help on this so far- thanks to everyone that has offered up solutions and help! there was talk a one point in a recent conversation that there could possibly be a 108mm output flange that can be swapped into an 01x transaxle- alleviating all headaches! I emailed Scott on his...
  4. P

    01x Inner CV sizing or measurements needed

    Question- how much are y’all paying for these spacers? I just got a $650 quote...seemed a little out of the ordinary!
  5. P

    01x Inner CV sizing or measurements needed

    So how much are these spacers y’all are having made costing? If I’m going 1k in the hole on driveshafts - I guess I should check on that first as I know 930 shafts will Work on the Lotus side and are available in various lengths... its finding the right lengths that’s the issue-wish they made a...
  6. P

    01x Inner CV sizing or measurements needed

    thanks Cliff- my Audi inner plate is a different size than the lotus outer axle connection. i know the Porsche G50 is the same bolt pattern as the lotus (same on both sides) so that would be easier for sure! appears the 01X is different that the olders audis !
  7. P

    01x Inner CV sizing or measurements needed

    Wow- perfect! i am assuming the red would match the output flange on the 01x transaxle? so those are 104mm center to center across the diameter. Thanks!
  8. P

    01x Inner CV sizing or measurements needed

    i know- i just thought i would ask the community first... try other avenues before pestering those that get paid for this type of info! truthfully he will probably end up rebuilding mine in the long run!
  9. P

    01x Inner CV sizing or measurements needed

    Does anyone have any information on the inner CV joint for this 01X transaxle? I had to go with this from Lithuania and I know it went to a AUDI A4 B7 8E – I’m assuming a 2.0 TDI 6Spd car.... But it didn’t come with axles. Trying to get them made and while it have the outer CVs to measure- I...
  10. P

    Audi 01X Indexing Sleeve/ Dowel Part Number needed

    I have been looking around as that is a great idea... not many tubbing shops that arent online... but i will try Grainger... and i might just run by my local fad shop and see if they will cut me one. might be a little pricey but its the right way! if i could find the part# i would have a buddy...
  11. P

    Audi 01X Indexing Sleeve/ Dowel Part Number needed

    The transaxle i had sent over from europe to the states didnt come with an alignment sleeve/ indexing dowel to assure proper alignment to the engine (or adapter plate in this case. Of course it came off a version of an A4 that wasn't available over here in the states and the parts guy cant...
  12. P

    Hello from Atlanta! Looking for drivetrain knowledge

    Hello! I've found myself with an inexpensive 88 lotus esprit that is ripe for an LS swap... And y'all have all the knowledge on that sort of thing. Specifically trying to find some info on the Audi O1e transaxle - I here Scott is the man to talk to in the states for this from my searches. I'll...
Top