Search results

  1. B

    Mike in Bucks County, PA

    Hi Mike. I am a fourth local owner of a gt40 project. I am located in Keyser, WV close to Cumberland, Md. My project is going very slow but moving forward.
  2. B

    Need help with Renault un1 gearbox

    I need some help getting a clutch release bearing and a starter for my GT40 project. I have a Renault 3.44 diff modified gearbox. The serial number is 7700599238M. The clutch release shaft looks to be 30 mm. What release bearing fits this model? Also the kit came with billet flywheel ORG...
  3. B

    Gt-40 front nose fuel clearance

    1. How much has to be trimmed from the bottom of the fuel filler area for clearance around the fillers? mk1 Thanks, Bill
  4. B

    Need pictures of door interior

    I think I don't have the door interior handles and lock but don't understand what they look like or where they are to go. Could I get some pics of your doors? Thanks
  5. B

    MDA in West Virginia

    Everytime I tell someone I have an MDA, they tell me how I absolutely need to strengthen the rear end. Can someone help me what and where this strengthening needs to be?
  6. B

    MDA in West Virginia

    I was in the Detroit area and stopped by RCR. I was given a very good reception. He is the real thing, glad to know I can go to them for issues. I got an appreciation of how good his company is and the quality of his work. They will be getting a lot of my business in the future.
  7. B

    New member

    Welcome - lots of info here
  8. B

    Bob Woods in Texas

    Welcome to the site. You have quite a story - good luck and happy new year
  9. B

    New member

    Welcome - there's lots of discussions here
  10. B

    MK1 Do all gt40s have roll bars?

    I am building an existing MDA kit but it does not have a roll cage. I am wondering if it should have one for roll support or does the windshield give it stiffness?
  11. B

    Introduction

    Sorry for the loss, my sincere thoughts are with you. Last time I don't read all the posts, sorry I AMA new to this
  12. B

    Introduction

    Welcome to the adventure. I would recommend reading builder logs, it's really helpful. I am starting a build with an older kit. Didn't realize how little the space is inside and that it's not really a weekend car unless you are by yourself because there's little room for luggage. I am about...
  13. B

    GT40 Mk1 body alignment procedure

    I remember reading someone's very detailed procedure of what they did to align the body panels on their build. Of course, I can't find it now. Do you guys have any preferred methods or can point me in the right direction?
  14. B

    MDA in West Virginia

    Any chance I could come over and see your car? It looks about 90 minutes from Keyser
  15. B

    MDA in West Virginia

    I would like a copy. I have the assembly prints but would really like the actual schematics. Could I also get a picture of how you did your throttle cable at the pedal?
  16. B

    MDA in West Virginia

    I have the 4.91 version of the MDA build manual. Is that the last version? If not, could you email me the one you have? [email protected] Thanks
  17. B

    MDA in West Virginia

    Hi guys glad to have jumped in with both feet but I am really going to need some advice. I bought the MDA GT40 from Jim in Ohio. I will start a build log soon. Right now I could use help on how and where to run the electrical harness. Thanks, Bill
  18. B

    How did you run the wiring cleanly MDA

    I have an MDA GT40. Left hand drive. Got the wiring harness all labeled but I am not sure how and where to run it through the car for the cleanest look? Pictures would really help.
  19. B

    MTD new owner'

    Re: MDA owner Sorry, fat fingered that one - should be MDA
  20. B

    I am told I bought the mate to your MDA MK1. Was hoping you could email me to make questions...

    I am told I bought the mate to your MDA MK1. Was hoping you could email me to make questions easier. Jim also said you have a lot of lessons learned you could help me with. Bill Smith West Virginia, USA [email protected]
Top