Search results

  1. S

    GT40 Mk2 XGT-2 rear screen mesh size

    Thank you so much that really helps, appreciate it -Steve
  2. S

    GT40 Mk2 XGT-2 rear screen mesh size

    That looks great, hope I can find someone to make my frame as good as that
  3. S

    GT40 Mk2 XGT-2 rear screen mesh size

    That looks great thanks, what is the outer frame made from, aluminum I'm guessing but do you know the measurements or source for that, looks slightly rounded, not flat. -Steve
  4. S

    GT40 Mk2 XGT-2 rear screen mesh size

    here is the example of the xgt-2
  5. S

    GT40 Mk2 XGT-2 rear screen mesh size

    Trying to replicate the rear screen for a the xgt-2 with expanded stainless steel mesh screening but want to get the sizing correct. Looks like the open diamond shaped spaces are 1/4 inch high and approx 3/4" long 18 gauge in thickness. It may be a bit nitpicky but I like the way the original...
  6. S

    Mk2 tail screen

    I posted this also on the looking for forum but figured it might be appropriate here too. I am looking for the rear screen that goes from tail light to tail light for a Mk2. Thanks
  7. S

    Mk2 rear clamshell screen

    I'm looking for the rear screen between the tail lights, before I try to take on a fools errand and try to fabricate this I will see if anyone has one to sell, thanks -Steve
  8. S

    Superformance GT40 MKII Parts wanted

    Hey Rick if you have any of the cover plugs left over I could use some too, thanks -Steve
  9. S

    Looking for a set of superformance GT40 doors, just wondering if you have those, thanks -Steve

    Looking for a set of superformance GT40 doors, just wondering if you have those, thanks -Steve
  10. S

    Hi, looking to purchase the body alignment pins and receivers, just seeing if you still make...

    Hi, looking to purchase the body alignment pins and receivers, just seeing if you still make those, thanks -Steve
  11. S

    using stewart 240 fuel pump questions

    I felt so silly asking that question, thanks for making the response painless -steve
  12. S

    using stewart 240 fuel pump questions

    Possibly a silly question but I'm using 2 stewart warner 240 fuel pumps in parallel feeding a 302 ford. When I turn on the pumps they work great then the fispa fuel filter/regulator fills up the le mans carb gets 5psi pressure, then the pumps start to slow down, even stop and start up again...
  13. S

    superformance alternator warning light question

    I do it shows the wire goto connector B 4th position then to the red alternating warning light to the lower left of the tachometer on the dash. The light also receives 12V run power at all times, so it seems possible that the light itself acts as a resistor and the other side of the light...
  14. S

    superformance alternator warning light question

    just chasing down some gremlins in my electrical system and noted when I disconnected the alternator harness and when checking the two wires attached to the harness there is a black wire ( the F - i guess field connection) that gives out 12v when key turned to run position and 6-7 volts coming...
  15. S

    superformance fuel sending unit removal help

    worked like a charm, functioning perfectly now
  16. S

    superformance fuel sending unit removal help

    I took out the 6 small bolts that look like it keeps the sending unit in place, no movement of the sending unit, how do you lift the sending unit out. It has never really worked, always shows a 1/2 tank when empty. Thanks -Steve
  17. S

    Hi just wondering if you ever got rid of those doors, and if shipping is on the table, thanks -Steve

    Hi just wondering if you ever got rid of those doors, and if shipping is on the table, thanks -Steve
  18. S

    MKII inner panels

    You'll want to contact Bill Hough for these, he has them - just need to glass them in, should be able to find him here, if you can't I can go back thru my old emails and find his contact info
  19. S

    looking for a set of SPF GT40 doors

    Been trying to get my fiberglass doors to fit over the last several months but they weren't original SPF doors, I believe they were made by Bill Hough and came in 2 pieces each. After much cutting and epoxy I can see I still have alot more time to go with questionable results. any SPF doors out...
Top