Search results

  1. Shaun Sizen

    UN1 Oil Level & Leak

    Good lord that was a Renault design special !!!! Thanks will take on board and having a chat with Mick as I have a small list of questions, cheers all
  2. Shaun Sizen

    UN1 Oil Level & Leak

    Yes that about it, I put 3L in and it was under the mark will have a chat with Mick tomorrow got a list of questions building anyway
  3. Shaun Sizen

    UN1 Oil Level & Leak

    Cheers will do!!
  4. Shaun Sizen

    UN1 Oil Level & Leak

    Evening all Ok so filled my recon UN1 last night to just below the fill hole as I ran out of oil, that was 3L, popped up tonight to see a puddle of oil under the box, seems to be coming out from the drive shafts, worse on the passenger side, I assume UN1 is fill to plug level? If so then any...
  5. Shaun Sizen

    Southern GT Chassis #54 Build - The What Have I Done Chronicles!!

    Hi Jasper, got it from Mick at SGT it was made by this Tim aka http://www.autosportelectronics.co.uk/ Its a well made loom, some of the leads are too short which is a bit irritating but as you say well made.
  6. Shaun Sizen

    Southern GT Chassis #54 Build - The What Have I Done Chronicles!!

    Ok been a while and had the camera in the workshop tonight taking some photos of loom plugs so i van have some made up so... Had to move the coil pack, originally on the passenger side but it was in the way of the ECU loom, probably better on the driver side as closer to the ignition pack...
  7. Shaun Sizen

    If a 917 ------

    Different fan theme anyone remember this short foray!!
  8. Shaun Sizen

    Plug Cap Angle

    Cheers chaps under seems the way and angled, I'll see what best fits, really appreciated.
  9. Shaun Sizen

    Plug Cap Angle

    Hi all Not sure if this is engine or electrics but what the heck !! Plug cap angle to best miss the snakes....Straight, 90 or 135? Also best to loop up and over the rockers I guess? Real Steel recommend Moroso Blue Max spiral core Cheers
  10. Shaun Sizen

    FS EU MSD 8579 Distributor

    SOLD!!
  11. Shaun Sizen

    FS EU MSD 8579 Distributor

    Hi Got brand new unused (no box) 8579 I don't need as I needed a dual trigger one that is on its way from the USA https://www.holley.com/products/ignition/distributors/ford/parts/8579 Has a small scuff mark round the clamp ring apart from that is as new, have all the paperwork and spring...
  12. Shaun Sizen

    Advice on weatherproofing a Southern GT Pedal box

    I had a cover made to go over the pedal box which with a little sealing could made it pretty watertight, the bloke made 2 so have a spare if you want it?
  13. Shaun Sizen

    Ago's scratchbuilt GT40 Mk I

    Would love to know how the grip looks and fits I hate the one I have in mine just looks cheap and chunky
  14. Shaun Sizen

    Southern GT #48

    I struggled to find a UK supplier but not sure if I tried Roadcraft, good price there I paid a fair bit more for mine, cheers
  15. Shaun Sizen

    Southern GT #48

    I used a pair of these in mine they feed a swirl pot then HP to the fuel rail, I spent ages looking at fuel pumps, these lift which is good as they are sited (as they seem to be in most GT40's) above the tank...
  16. Shaun Sizen

    Southern GT #48

    Agree Speedflow are good as are this lot who I use and a bit cheaper https://www.motorsport-tools.com/ I did some some from other suppliers but they were shocking, no taper on the insert into the hose so very easy to catch the PTFE lining. Laos for odd ones there is an y seller, they are also...
  17. Shaun Sizen

    Southern GT #48

    If you do use clamps and like you chaps I am never sure why cheapo worm drive ones are used, I always use the Mikalor stainless T Bolt clamps, so much better to tighten.
  18. Shaun Sizen

    SouthernGT Number 18

    As before mate is a beauty, great paint and a great build, must catch up when all this is over :)
  19. Shaun Sizen

    Ultrasonic cleaning

    Hi Ron, I use EP26R as its quite gentle on the cable parts but with carbs you can use stronger, there are a few others this is a UK site but will give some pointers https://www.carbusonic.co.uk/Ultrasonic-Cleaning-Solution/
Top