Search results

  1. M

    FS USA Coolant tank

    I have the coolant reservoir that came with my SLC kit (I ended up using a different tank). $20 plus shipping from 98052.
  2. M

    FS USA SLC inner door trim panels (pair)

    I bought these with my kit but have decided not to use them. I unwrapped one of them for pics, the other is still in original packing wrap. $50 for the pair plus shipping from 98052.
  3. M

    FS USA RCR fuel swirl pot / surge tank

    Original tank that came with my SLC from RCR. Perfect condition / never used or installed. $50 plus shipping from 98052.
  4. M

    FS USA Stock RCR SLC seats (pair)

  5. M

    FS USA LS7 exhaust flanges

  6. M

    FS USA LS7 Exhaust flanges

    Hi everyone, I have a full set (4) of factory flanges. 2 are cut from ls7 manifolds just above the flange. The other two have elbows still attached with O2 bungs, cut just before the cats. I also have the cat pipes if you want them. $150 shipped within US Lower 48 for all the flanges. Add...
  7. M

    pins for GM (olds) column?

    Hi guys, the harness that came with my kit doesn't have the column plug horn wire connected to the Infinitybox. I'm trying to figure out where I can get the right style pin to add it. Any ideas?
  8. M

    Wiring fans to both come on for AC or Engine

    Tried searching the forum with no luck :( I'm wiring both fans to come on for AC and/or engine temp. I was just going to do this by running both powercell fan outputs to a single relay that in turn powers both fans. Is this a logical approach? Any better (more simple) options? Do I need to...
  9. M

    Where to find Tillett seats?

    Where are you guys buying Tillett B5's? Tillett USA is backordered. I found a UK place that will ship pretty reasonably, but wondering if there's a better source in the USA. Thanks!
  10. M

    Graziano starter bolt size?

    Hi guys, can someone confirm what thread pitch for Graziano starter bolts? I had read here M12x1.25, but they're not threading in. Thanks!
  11. M

    Don't forget your Graziano alignment dowels

    Hi guys, Thought I'd post this since I didn't see the info in any of the Graziano install threads. There are two alignment dowels (aka pins, sleeves) required to properly align the Graz to the adapter plate. While you can install it without them, there's sufficient misalignment potential...
  12. M

    FS USA Price drop, SLC sway bars

    RCR Factory SLC sway-bars, front and rear, include end links and mounting brackets. New, never installed. Paid $995 from RCR Will sell for $800 plus shipping. Pics attached:
  13. M

    FS USA SLC Sway Bars

    I've decided to sell my sway bar kit (new, never installed). RCR Factory SLC sway-bars, front and rear, with end links and mounting brackets. Paid $995 from RCR Will sell for $950 including shipping to lower 48 US
  14. M

    Sway bar mounting / pics?

    Hi guys, Unfortunately Fran's shop doesn't have any cars with sway bars there currently so I haven't been able to get pics from them. Does anyone have pics of the mounting points they could share? I think I figured out where the bars themselves need to mount, but not clear on the end link...
  15. M

    Removing the "Chevrolet" lettering from calipers?

    Has anyone tried to remove the "Chevrolet" lettering from the standard Brembo calipers? I actually like the stock grey color on the calipers and want to keep the "Brembo" logo, but if I can't remove the Chevy lettering, I'll just get them powder coated. Thanks!
  16. M

    Mark B's Build Thread

    Since I've had the car for 6 months already I thought I'd start a build thread... It's going to be a slow process since the car is #4 behind my wife, two kids, and work, but it will get there :) First the delivery pics and making it in to my driveway designed for 4X4's :(
  17. M

    SLC Arrived!

    The SLC arrived this week! After changing jobs, moving from Houston to Redmond, changing colors on the car, and lots of other things in between, I'm now the proud owner of a collection of beautiful parts :) The funny part about the delivery is that it was raining all night, and all morning...
  18. M

    FS USA Corvette LS7 Exhaust manifolds

    In my haste to get parts for my SLC build, I ended up with a second set of LS7 Corvette exhaust manifolds (one pair). Manifolds are in very good condition, but they are missing 4 studs (I have 4, they need 8 for the pair). Just looking to get what I bought them for on CorvetteForum: $100...
  19. M

    Clearance above LS engine?

    Hi everyone, Still a long wait for my car, so I'm working on the engine. I'm trying to see what kind of intake I want to go with on an LS engine I'm putting together. I know a stock style manifold fits but trying to see how much taller I can go. Does anyone happen to know what the...
  20. M

    Took the plunge!

    Hi everyone, I've been lurking here for a while doing research and finally decided to place my order on Friday! So for the next 16 weeks or so I'll be gathering parts and building my motor :) I'm building the car as a street car with occasional track days. Here's the plan so far...