Search results

  1. M

    Mason’s Build: Superlite SLC

    Thanks Mark, one other detail is that the Y should be centered so that the pressure is equalized. If you do this also make sure you buy submersible fuel hose, I bought a 10’ spool of dayco for $120. The official lifespan for the cell is 5 years max, and +2 years if it passes inspection so best...
  2. M

    Mason’s Build: Superlite SLC

    Before closing up the fuel tank I added a second Holley Hydramat to my fuel cell. This will provide fuel under heavy cornering even when the fuel level is very low. Fingers crossed that this works well, since the Hydramats and fixtures are not cheap! The fuel cell has added cost and complexity...
  3. M

    Mason’s Build: Superlite SLC

    I‘m replacing my steering column due to a bad headlight switch and sticky bearings. Previous owner had let it sit in the elements, so it was not in good shape. A low mileage salvage 99-02 Oldsmobile intrigue column was $80 Shipped and it is buttery smooth and It needs a few modifications to fit...
  4. M

    New here, few questions about the SLC

    Hey Kyle, how is your progress going on the build. Were you able to hit your 3 month roller target?
  5. M

    Aaron's SL-C build...

    Exciting times Aaron, cant wait for pics of all this body mod work!
  6. M

    Mason’s Build: Superlite SLC

    Jasper, this is fantastic advice. Thinking of this as a prototype harness will free up my mind to experiment and develop the car without being obsessed about every wire run being perfect on the first try. Thanks dude! BTW Do you use the fancy PDMs or the normal fuse box and relays?
  7. M

    Superlite gated shifter

    Hi Ed, I made 2 quick videos for you since I recently installed my shifter and drive train for my first drive around the driveway. Hopefully these help, PM me if you need more specific help. Video 1: https://share.icloud.com/photos/0zZMDRE8fvZHIKIlxoFPO26HQ#Woodinville Video 2...
  8. M

    Stephan's SLC Build Log

    Stephan, why did you need 8 push-in bushings? I'm only seeing 4 being used between the two calipers.
  9. M

    Stephan's SLC Build Log

    Yeehaw! Thanks Stephan!
  10. M

    Mason’s Build: Superlite SLC

    Jasper! You were the catalyst. I’ve actually bought the entire lifetime HPacademy.com package and I’m taking the Motorsport level wiring course. Thanks for your advice! I have resisted terminating/sheathing long runs while I continue to document and test every circuit and sensor. I’m so...
  11. M

    Mason’s Build: Superlite SLC

    Latest update is on YouTube, check it out!
  12. M

    Stephan's SLC Build Log

    Hello Stephan, I am interested in replicating your Aluminum mounts. Can you provide the thickness of the angle aluminum and some dimensions? Also, will you share part numbers for the push-in bushings?
  13. M

    Joel’s SL-C Build Thread

    Thanks Joel, your build is cruising along, I love seeing your videos!
  14. M

    Joel’s SL-C Build Thread

    Great progress Joel, I like your ram lift mount setup. Could you do me a quick favor and measure the height of the anchor air duct part? I do not have that piece and I need to fabricate some dashboard mounts that are the correct height.
  15. M

    Mason’s Build: Superlite SLC

    Kurt, I kept running into the bolt-on versions That you linked but my ecu specifies a higher tooth count if I want to use the built in traction control. Steven, thanks for the part Numbers that will work perfectly since my CV axles are 108mmx40mm.
  16. M

    Mason’s Build: Superlite SLC

    I have a quick question about tone rings (reluctor rings/ABS wheel sensor rings). I have contacted RCR 3 times to buy the rings without success and I have also spoken to The Driveshaft Shop and they are unaware of this item. Is there an alternative source for these press on rings for the...
  17. M

    Aaron's SL-C build...

    My interest is piqued with your mods to the rear tail. This is an awesome build thread, I think you are winning the king of fiberglass award, this is definitely a one-off superlite!
  18. M

    Mason’s Build: Superlite SLC

    Thanks Howard, I'll suck it up and remove the shock mount :)
  19. M

    Unfinished SLC Project For Sale

    Any photos to share Bill? Good luck with sale.
  20. M

    S2's Build Thread

    Glad to hear that the Albins is working out, freeing up space for the exhaust is a big plus. I look forward to the results of your research on the paddle shift system. I think the whine is not too bad from the video. But, the amount of sound deadening material can make a huge difference on long...
Top