Search results

  1. 4

    Paint and Body Work on RCR Cars...

    I am quessing that you are looking at $15,000 t0 $25,000 depending on the state of the body and the level of fit you have managed. It all boils down to time
  2. 4

    Construction / manufacture year?

    It depends on the Manufacturer. As an example if that were a GTD unit that number would mean it was the 221 car built and that it was done in 1990.
  3. 4

    BF Goodrich tyres

    If you really follow the speed limit signs - especially those suggested for curves get the T/A's. If you enjoy spirited drives get the Avons or Yokohamas or Hankooks or etc. I started with T/A's and found myself tip toeing around the track until I switched to Hoosiers (not a street tire ).
  4. 4

    Literature on GT40

    You can get the Legate book as an e-book from Barnes and Noble for about 20 dollars.
  5. 4

    Need help with my GTD40 Clutch

    I had this part btreak several years back. My research found that it is a Lotus part. It was available thru SJ Sports cars in the UK. I bought mine from Bean Engineering here in California. The part number I have is A082F6231F - Good Luck in your search.
  6. 4

    GTD Front Control Arms - Which bushes ?

    Try contacting Mark Sibley. He was the parts guy for GTD and is probably aware of who supplied what.
  7. 4

    Clear Sealant for Headlight Lens/Covers

    If you want to have it water tight you will have to have some kind of sealing material. If you don't like the black ring try painting it the body color.
  8. 4

    Is this CAV GT40 a good buy?

    The price is very good if the car is as represented and is unwracked and properly built. You need to have eyes on the unit if you are going to buy !
  9. 4

    Fiberfab

    Based on the pictures you have posted I am guessing t you will spend a lot more money to turn this unit into a decent looking, road worthy unit than you could ever get from a sale.
  10. 4

    GT40 replica prices

    Why not?
  11. 4

    Happy Birthday

    Happy Birthday to Ray, the GTD 40 Godfather .
  12. 4

    GTD chassis/vin plate

    Here is a repost of the picture of the GTD plate for those who might be looking for one.
  13. 4

    Mirror Pics wanted

    Best thing I ever did was add electric Chrysler Cross fire mirrors to the lower corner of the side windows. The rear and side vision was so improved I did not get nervous when driving in traffic for fear that I would miss seeing the surrounding traffic.
  14. 4

    Mirror Pics wanted

    Best addition ever was the installation of electric mirrors from a Chrysler Cross Fire. I installed them on the front lower corner of the window and good set them to have great rear and side vision viewing. I have since sold the car so can't show you pictures.
  15. 4

    Braided Hoses Throughout!!

    The key, I believe, is what type of braided line you use. Hard but bendable Teflon in a braided cover equal solid not spongey. Typical rubber flexeble braided line probably equals spongey.
  16. 4

    GTD40 Fuel Sender

    Open the rear clam shell. There should be a square cover plate on each side on the flat section below the water fill bottle and the fuel pumps.
  17. 4

    Removing GTD Front Lower Wishbone Advice

    You should find the bolts when you remove the water pipe cover in the footwell and the small cover in the opposite footwell. Attached is a frame drawing with the gladding removed. I hope this will help you.
  18. 4

    Turn signal switch

    If you are happy with the flip switch (that's what I used for years on my GTD)use Lucas 31743. It is the same type of switch they used for the left/off/right fuel pump switch control
  19. 4

    Need 6 drive pins and a brake rotor hat

    As long as you have a good drive pin for a sample you should be able to get them from ARP_the quality bolt people.
Top