Search results

  1. C

    255 ci NA DOHC Ford Indy Engine

    Agree, saw at least one at Jay Cushman's shop several years ago... He has a good collection of hard to find motors and parts...
  2. C


    I may have a spare set from RCR, also. I don't believe they will cost much. If Graham can't find them, let me know.
  3. C

    Ford vs Ferrari coastal drive

    What a great idea!
  4. C

    Hacking an IDA 'Weber', turning it into EFI

    I had to dig up some of my old build pics. But here are a few pics that should answer your question. I just saw that Borla Induction has another system out. Mine works pretty well as-is. You can see the smaller plenum is for the IAC, the larger plenum is the vacuum manifold and the MAP...
  5. C

    Hacking an IDA 'Weber', turning it into EFI

    Jasper, I believe you are thinking of the old (+6 yrs ago) TWM now Borla system? The later version has located the injectors below the throttle plate and they are angled directly at the intake port, thus the fuel rails run along the centerline between the throttle bodies. They have been using...
  6. C

    Centroid Fuel Sender

    I don't trust the stock centroids/Speedhut combo that came with mine. Maybe it's the anti-slosh foam causing issues but my gauges will sometimes ready accurately, other times will show empty when I'm near full or show full, when I know I'm about empty in that tank. Will look into the Classic...
  7. C

    Rear Clip

    Sorry can't help you at this time but don't trim any fiberglass just yet! My car is in CO and I'm nowhere near to take pics or measure for you. Anyway the way those brackets are attached don't look right. You still have some alignment to do! If I remember correctly, I propped, aligned...
  8. C

    Anyone ever used Stack Injection ITB setup?

    Yes, I do. However, I sample my oil every 2k miles or each year to trend silicon and other elements to help prognosticate high wear items. I perform compression and leak-down checks every year as part of my 'annual' and they are all excellent. I also drop the oil pan (easy to do) and inspect...
  9. C

    Anyone ever used Stack Injection ITB setup?

    Agree, I went straight to the contactless (Hall-Effect), Throttle Position Sensor knowing that this is one of the most important sensors in the system. The Penny+Giles (TPS280DP) is the upgrade option that was/is offered with the Borla Stack System. Sealed to prevent water intrusion, and life...
  10. C

    Anyone ever used Stack Injection ITB setup?

    I've run the newer version TWM/Borla Stack Injection system since day one. Although it ran pretty good with the included self-learning "EZ-EFI" after a few hundred miles of 'learning', that system is only designed to control fuel. I also had a separate computer programmable ignition box, but I...
  11. C

    Paint and Body Work on RCR Cars...

    I could go on and on with this topic being one that enjoys playing around with fiberglass, carbon, kevlar, and making molds. Going to SEMA and being able to closely inspect the GT-40s there did not impress me. I'm too anal when it comes to these cars. Therein lies my personal dilemma as the...
  12. C

    Miami Active Power Build

    Congrats! Looks like the wheels fit nicely! ;-)
  13. C

    RCR GT40 Front Wheel Hubs...

    To preclude any initial setup issues, I sold the ones that came with my RCR and purchased the Timkens from Rock Auto. Now that was back in 2012 and they are still holding up well (~7000 miles). I see they are still available but it appears they have significantly dropped in price. Maybe due...
  14. C

    Comment by 'Cobrajet' in media 'Cobrajet's GT-40 MKI'

    Sorry Kirk, I do not. What I do have are hundreds of pics in case I wanted to so so later, or to help guys along the way. When I was home, I devoted all my time to building and finishing the car during the day and spending time with my wife in the evenings, so very little time to post to a...
  15. C

    Superformance Rear anti roll (Sway) bar help

    You can get the links from either SPF or Cushman Competition. Here's an example pic of what I have.
  16. C

    Superformance Rear anti roll (Sway) bar help

    Jason, it's an original bar with no fittings, e.g. drop links, etc.
  17. C

    Superformance Rear anti roll (Sway) bar help

    I have one, but it's in my shop in CO, and I'll be away for a bit. How soon do you need it? Should be easy to make, but not sure if there's a hardening process for these anti-roll bars.
  18. C

    Flairs or Not.

    Phil, sent you a PM with pics of my +2. Good luck!
  19. 20190831_140348.jpg


  20. 20190831_140422.jpg