Search results

  1. S

    It run's !

    The slc is up and running I do have a question on the transaxle oil. I am running red line as recommended, I filled it with four quarts thinking it was empty because when I had the plugs out for the transmission cooler lines nothing came out. Now I have seen posts that say it comes with fluid...
  2. S

    slc air filter assembly race tail

    I looked around at other builds to see how everyone was handling the race tail lack of room for the air filter assembly. I then looked at gm's requirements for my ls 376, 10'' from the throttle body for the maf and mounted in a straight 6'' run of 4'' tubing and realized it was a pain in the...
  3. S

    Heat shielding

    I got my firewall heat shield done, then built removable panels with shielding on them on either side of the engine. The right side pad is done but is waiting final trimming due to cooler lines and shifter cables.
  4. S

    slc rear sway bar

    It took a little bit but here is what I came up with for the rear sway bar. I started with the lightest bar 155lb and should have great adjustability I have used this set up before and have had great success with it. I am running the grazziano so with additional bracing things are tight but it...
  5. S

    slc rear scoop

    Trying to figure out where to pull cold air from on the back has been a challenge the only solution after looking at it for a long time was to install a scoop and I will build a cold air box. I went through my molds and decided that my boss 429 mustang hood scoop mold looked the best [at least...
  6. S

    slc oil coolers

    I used the same coolers as use on my 427 cobras. Thanks to a cue from Cam for 27 dollars I got shields from ebay for the grazziano, blasted them and they are like new. I am waiting on a 120 degree fitting for the transaxle cooler.
  7. S

    SLC fuel system

    This is what we came up with on the fuel system. I think it is typical for the LS set up although I think I lost my mind when I emptied my Bin of 90 % of its AN fittings to do an all braided system. I have done it this way for r&r of any of the components. I tried to keep things accessible. I...
  8. S

    Dash and interior

    I know this is different then most but I wanted something different
  9. S

    slc sway bars

    I am finally able to work on our slc again with hopes of finishing it up. I have Frans stock sway bars which I will not use, I will make them available if someone wants to use them at a fire sale price. we use speedway engineering bars which give us great ability to fine tune the chassis, my...
  10. S

    slc floors

    I know the seat boxes are dropped 1'' I know they made an extended footbox to move the pedals forward for taller people [I am 6' 3''] I cant find any pictures of that. Has anyone dropped the pedal box my size 12 feet hit the steering shaft [usual for me] and it looks like I will drop the pedal...
  11. S

    SLC Dash and Gauges

    Has anyone used different gauges in the slc? I know it requires changing the dash for more gauges. I searched and found interiors but gauges seem to be the same mostly the koso unit.
  12. S

    slc bulkhead

    Has anyone installed a bulkhead window on a superlite coupe?
  13. S

    z-f bell housing steel or aluminum?

    I don't know if it has been brought up before, but its time for me to ask. We went out to the track with our mk-2 and It worked great! cornering braking acceleration all exceeded my expectations. I ran it as I normally would not race hard shifting between 6 and 6500 without any problems. I had...
  14. S

    SLC ford or chevy

    Is anyone running a ford motor in there SLC, and is anybody doing it with a Grazziano. I imagine the ford mustang gt-350 motor will be available soon if not already and am curious between it and the LS in the superlite.
  15. S

    flipping my z-f

    I read a bunch of the threads I found, to find out what exactly needs to be done to flip a z-f . I could not find specific information on what exactly needs to be done. I would like to find something in written form if possible and thought about ERA as I know they have been mentioned as a source...
  16. S

    Rcr gt40 mkiv

    After reading the post about RCR's (Fran) 917's and 962's, which also mentioned the SLC and the GT40, I felt compelled to make a post. One of our new projects, along with the SLC, is a RCR GT40 MKIV. I am not the best at posting pictures, but I am trying to improve! I will start with the...
  17. S

    slc Ls 376 and grazziano

    Picked up the ring gear from Audi today it fits right onto the clutch assemble. The starter was sourced from one of my local suppliers according to the numbers from Francis I crossed it to a 1996-2006 Volkswagen Jetta 1.9 liter manual transmission just over 100 dollars, core of 80 dollars [we...
  18. S

    slc with ls 376 and grazziano

    anyone else running the ls engine with the grazziano transaxle in there slc?
  19. S

    race car replicas

    Looks like fran is back to racing! looks like they are gone doing the endurance race from the 20th-27th lets hope they do well! I as well as others, I am sure will be watching
Top