Search results

  1. B

    Alans Scratch build

    I am using a Hobart handler mvp 210 Mig. And a Everlast power pro 256si tig stick plasma combo welder.
  2. B

    the design of the front and rear upright for a GT40 MK1

    Hi olivier. I am building the gt forte design and like in barts post i too like chris ardens design with the c5 vette suspension, next chassis i build will incorporate vette suspension most likely. Any way i have some drawings i want to share with you. They dont have all the measurements but to...
  3. B

    Gt40 Dash Board

    Hi paul did you sell this dash?
  4. B

    Bryan's GT-Forte build

    Hi morten i do have plenty of 302 ho engines so i can definetly go that route. Kristian i do have drawings for suspension arms and i have a drawing or two of the steel uprights gt forte had. But they are incomplete as far as dimensions go. I will pm you sometime this week.
  5. B

    Bryan's GT-Forte build

    The flat pack was about 90 percent of the tubing for the main chassis. The plans where various pictures. And two dimensional drawings of front pickups for suspension and drawings for all the sheetmetal panels. There was some other various drawings. I now have a big library of data thanks to...
  6. B

    Alans Scratch build

    Build is looking good. Where did you source your body from?
  7. B

    Gt40 body

    6800 i think was what Bill hough quoted me. Look up Daytona Bill.
  8. B

    Purple GT40s

    Saw this one for sell on here some time back.
  9. B

    Bryan's GT-Forte build

    Been awhile since i posted. I need help deciding on chromoly tubing for all my suspension. I dont know what size tubing everyone is using. Butt i need to order tubing soon. Im thinking 1 inch with .125 sidewall thickness for all my a arms, trailling arms, rear a arms and links. Some one chime in...
  10. B

    Bryan's GT-Forte build

    Thanks for your insight terry. Are you running the 930 or the g50. I found a 930 for 5000.
  11. B

    Bryan's GT-Forte build

    Made a little progress on presidents day. Welded out the main structure. Got some grinding to do now. Welded the dash frame up, and cleaned and etch primed all the tubes for the horse shoe. Primed the tranny mounts and captured nuts. And welded out the tubing for the transaxle to sit on. I...
  12. B

    Bryan's GT-Forte build

    Joined my two sub assemblys together and i added the four front post although i havent took a picture of that yet. Everything is still straight and true. Within 1mm. Hope to have some more photos soon.
  13. B

    Ago's scratchbuilt GT40 Mk I

    Where did you order the laser cut upright kit from.? I would be interested in a kit too.
  14. B

    Bryan's GT-Forte build

    Made a mistake or two and had to cut and reposition a few of the tubes. Guess thats what i get for getting in a hurry. I mocked up the middle section and most of the vertical tubes that attach the two together. Everything jiged up good so hopefully this weekend i will be able to do some...
  15. B

    Bryan's GT-Forte build

    I welded up the middle rail section some time back in january. Then i had to take a break from the build to remodel the house. Hopefully i will get back to working on the 40 over the summer. No other real progress at this time. I did buy a Tig for Christmas butt its still in the bag havent even...
  16. B

    Posting Pictures

    Welded up the middle section. A while back. Got real busy remodeling house. Hopefully will be able to get back to this project. I bought a everlast tig butt havent even had a chance to plug it in and try it ou
  17. B

    Posting Pictures

    What can i do to get the orientation of my photos right? Is there a rotate function every time i post a photo its side ways. Ive been using a galaxy note 8
  18. B

    Bryan's GT-Forte build

    Hey charlie i used 2x6 for the frame with 2x12 at one end which is actually the middle of the table. Below the table is storage and im using 3/8 ply there. The top is two layers 1 layer of MDF 4x8 and then melamine 4x8 both are 3/4 inch thick if i remember right. If i did it over i would just...
  19. B

    Bryan's GT-Forte build

    Mike, bill, or nick how can i rotate the pictures i post???? There all sideways and i cant seem to find a rotate function ??
  20. B

    Bryan's GT-Forte build

    Thanks nick , I bet it does. Im actually working on the middle section now. Im following your build in the order of how you assembled the sections together. Although i weld out the entire frame each time i add to it and grind the bottom flush each time. So far its staying pretty flat. just takin...
Top