Search results

  1. VintageVenom

    ZF on Ebay

    Just stumbled across this...thought I'd post it: 1975 ZF-2
  2. VintageVenom

    Doug's RCR

    Congratulations Doug, I chose the natural aluminum. The only down side was scratches showed. The scotch brite finish would permit you to re-scuff areas to keep the finish uniform. With that said, the next one will be powder coated. about some pics of the stang...!! :thumbsup:
  3. VintageVenom

    INtake Vent line

    I agree.....smaller is better. You want air to move through it, but minimal amounts of coolant. I'd say either mentioned would do the job.....I would view them both as "small".
  4. VintageVenom

    ZF Fluid type and quantity

    Hey Chuck, I've heard others also complain about leaks. However, I think if it is put together with care, there should be no issues. I've been told not to use sealer, however I didn't listen to this advise. When the unit was stripped down, I cleaned all the mating surfaces very carefully...
  5. VintageVenom

    ZF Fluid type and quantity

    Hi Chuck, Per Lloyd @ RBT, 3qts with no friction modifier additives was the response when I asked a couple years ago. I used good ole fashioned 80/90 in mine (well.....what was mine... ;-) Did some google searches... you may find this one of value: ZF reseal
  6. VintageVenom

    Ciao !!

    Ciao Domenico e' benvenuto, La vostra 40 e bellissima. Ancora photos per favore.............:D
  7. VintageVenom

    Howard B's RCR 40

    Cool Howard. Looks fantastic. Yep....good mental health accomplishment. :)
  8. VintageVenom

    I did it! I did it! Its on Order!

    Congrats Marc, Looking forward to seeing the build progress.
  9. VintageVenom

    J. Salmon RCR-40 Build

    J, Looking fanstastic man! Just thought I'd chime in and let you know that I too believe in teflon for NPT. I used tape in the joint in question (90º elbow into cal) on my Wilwoods. No leaks.
  10. VintageVenom

    massa crash slow mo review

    Now that sucks..... looks like he was out cold after debris impact. Watch his head movements. video
  11. VintageVenom

    Dutton's RCR40 Build Thread

    Looking great Tim. Can't wait to see some sun shine pics..or maybe some video....:D
  12. VintageVenom


    Well done Tom. I know you busted you ass to get there. The car looks great, as did the presentation of it. Congratulations.
  13. VintageVenom

    Toms RCR 40 Trackracer

    Fantastic Tom. She looks stunning!! :thumbsup: Best of luck with the car show.
  14. VintageVenom

    Toms RCR 40 Trackracer

    Awesome Tom! Looks great. The body symmetry looks fantastic.
  15. VintageVenom

    Nemesis testing report.

    Oh...come on Mark! That is ridiculous...! You can't do that man......:furious: So, how long do we have to wait....?
  16. VintageVenom

    Nemesis testing report.

    Cool bizz man. Straight off the shop floor to tangling with that's not too shabby mate. Well done!
  17. VintageVenom

    Chuck and Ryan's RCR Build

    Chuck, Good to hear you've got the webers sorted. Sounds like you got them about where I ended up too. At start up I would get a couple pops. I dismissed this as no concern considering there are no chokes. After running for a couple minutes they were good. At random, every now and then...
  18. VintageVenom

    Canadian Coupe

    That would indeed be cool. High MPG...high torque....farfegnugen baby! Either looks bad ass!
  19. VintageVenom

    Hi Steve, Sorry man.....but I had no idea you started this "conversation" with me. I have never...

    Hi Steve, Sorry man.....but I had no idea you started this "conversation" with me. I have never used this function of the forum, and since apparently this function does not send an e-mail notification.... I had no idea. I actually stumbled upon it today. Again....sorry. So, about the lifts; I...
  20. VintageVenom

    A dilemma (NSFW)

    OK guys.... think I came across a winner. It's a vid, not a pic, but it is absolutely car and hottie legal. BTW....I also think I'm in love...:heart: Hottie running a Ferrari