Search results

  1. Jkviper

    FS USA Tillett TB2 Brackets

    These did not work for me, but may work for your build. Two pair of Tillett TB2 seat brackets. They work for Tillett B5 seats. The mounting holes are 23cm apart. They are designed to work with the Tillett TR1 runners. Here is a link to the documentation…...
  2. Jkviper

    FS USA KOSO RXF Gauge Cluster for sale

    Hi, I am selling a brand new KOSO RXF multimeter gauge cluster. Will fit perfectly in the SLC driver binnacle. A great upgrade for any SLC already wired for the prior Gen KOSO. I am selling this since the engine I chose is not friendly for analog signals and everything needs to be scanned off...
  3. Jkviper

    New Tillet Seat B8 which is an XL version of the B5

    Now that I invested many hours into modifying the stock seats. Looks like Tillet has come out with a larger version of the B5 called the B8. I couldn’t find exact dimensions yet, but this is something I may consider. Here is a link... https://www.tillett.co.uk/shop/exd-B8-GRP-Carbon.asp?id=901
  4. Jkviper

    Recommended torque specs for 2010 Camaro brake calipers

    Hi everyone, Just looking for some recommendations on torquing up the Camaro SS calipers and banjo bolts. I found these specs online... The stock Camaro bolts are torque to yield so not sure if using Class 10 or 12 metric bolts you would use the same torque spec. The SS being the LS3 spec...
  5. Jkviper

    Proper torque for C4 Stub axles

    HI everyone. Happy Easter! I know many have switched over to the x-tracker setup. I’ll probably do that at some point, but want to get to go-cart and inspection before I go down that road. I’ve have a couple recommendations on an acceptable stub axle torque value between 120 ft-lbs to 200. My...
  6. Jkviper

    Correct Flare Nuts for NICOPP

    Quick question. If I was to use NICOPP to make some brake lines should I use brass, steel, or stainless flare nuts? Thanks for your help!
  7. Jkviper

    Recommended rubber and thickness to mount fuel tank.

    So many rubber choices at McMaster Carr and looking for some suggestions to mount the fuel tank. I was thinking of using medium hardness 1/8” silicone sheet under the tank and on the mounting brackets. Thanks for your help.
  8. Jkviper

    FS USA SOLD - RCR Adjustable Pedal Assembly

    Hi, RCR Adjustable pedal assembly, works with Tilton 600, 700, 800 series floor mounted pedals. Since I am using a power brake booster decided not to use this. $115 plus shipping
  9. Jkviper

    Hole pattern for RCR supplied steering wheel

    What is the actual hole pattern on the stock steering wheel? Should it be a Grant 5 hole pattern? I see many builders replace the stock wheel with 6 hole units. I like the wheel that comes with the kit but confused about the 5 hole pattern. The wheel does not match up to the 5 hole pattern on...
  10. Jkviper

    Another traction control system option

    I saw this on the factory five forums and one of the members vouched that it worked well for an LS engine. Looks like it works for port injection engines and not direct injection. http://www.racetcs.com/
  11. Jkviper

    Thread Size for petcock on SLC radiator?

    Hi, I want to replace the top petcock on the radiator with a barbed fitting. Wanted to confirm what size it is, I think it is a 1/2” NPT but not sure. Thanks for the help!
  12. Jkviper

    Condenser Orientation

    I’m wondering if it is absolutely necessary to mount the condenser with the #8 hose on top. I’d prefer to mount it on the bottom and would like to know if that will create an issue. Thanks for the help. Joel
  13. Jkviper

    Placement of cooling tubes under front control arm

    Hi everyone, Have a question about placement for the cooling tubes under the front control arms at full droop. Based on what I see, if I place the cooling tube with small gap, say 1/16” under the front control arm, the bottom of the cooling tube is about even with the underside of the chassis...
  14. Jkviper

    My status changed

    Hi, I noticed my paypal supporter fee was recently sent automatically, but my status of supporter disappeared and can no longer update my posts. please update my status. Thanks, Joel
  15. Jkviper

    304L or 316L for cooling tube elbows

    Hi, I am planning on having some elbows welded to the stainless steel cooling tubes. I see there is a choice between 304L and 316L stainless and that 316L is more corrosion resistant. My question is which is the better choice? I assume matching what is in the kit makes the most sense, but...
  16. Jkviper

    Question on SLC Brake and clutch lines

    Hi, I received these four pieces with my kit. I only need two and think thsee connect the clutch and the rear brake lines which ended in the middle of the spider on the driver side of the car. Thanks for the help. Closeup...
  17. Jkviper

    Radiator Bleed Setup Question

    Hi, looking for some recommendations with regard to the following 1)Is it necessary to run a bleeder line from the top of the radiator back to the header tank? Is it sufficient to just bleed the system on setup by opening the top drain valve slightly connect a hose temporarily, bleed the...
  18. Jkviper

    Mounting SLC Street Splitter?

    Hi, just trying to get a sense for how the splitter attaches to the radiator box front compartment. The are the two approaches I am thinking of.. 1)Is it attached to the underside of the radiator box by screws across the front and that also go through the bottom plate that secure both side...
  19. Jkviper

    Fan Shroud, To Weld or Not To Weld?

    Figure I’d pose this question. I am in the process of fabricating a fan shroud and haven’t decided how I will mount it. Looks like most builders simply weld it to the radiator and wondering if that is the recommended approach. I have dual brushless fans and they weigh 4.4 pounds each so figure...
  20. Jkviper

    Front tire poke at zero toe and zero camber

    Figure I’d throw out this issue for some comments before I contact RCR. I just put the body on the chassis for the first time and it appears my front tires stick out too far. I chose the recommended tire sizes on the Superlite web site which is 285-30-19 for the front and 335-25-20 for the...
Top