Search results

  1. Godspeed

    Mark B's Build Thread

    This is how I attached a removable tow hook. It has 1/4 inch plates below for strength.
  2. Godspeed

    Mark B's Build Thread

  3. Godspeed

    Help needed with axle/cv joint assembly

    The "C" clip without the provisions for the ring plier tool is usually used for an application where the axle stub is pushed into the differential carrier hence it is compressed into a splined hole. I have never seen it used to hold a gear on as its applied force is expansion as it clips into...
  4. Godspeed

    Stephan's SLC Build Log

    Are they aluminum or stainless?
  5. Godspeed

    Access to the Build Manuals on

    I just logged in on an Apple and had no problem.
  6. Godspeed

    S2's Build Thread

    I will be ordering 7 inch long 2.50id 800 lb springs. I believe they should fit.
  7. Godspeed

    S2's Build Thread

    Thanks Scott for taking the time to measure them. Looks like I'm going with a set of Eibachs.
  8. Godspeed

    S2's Build Thread

    P.S. Your build is amazing!
  9. Godspeed

    S2's Build Thread

    Scott I'm in process of replacing my rear springs. The 650 lb springs are too light for spirited driving on the poorly maintained Pennsylvania roads. I recently got a set of Hyperco 850lb springs but their outside diameter is too large and they interfere with the frame. I was checking into a set...
  10. Godspeed

    FS USA Random SLC parts (Sold)

    Kyle does the Koso include the wiring and sensors? Also is it $100 for all four tailights?
  11. Godspeed


    Selling or buying?
  12. Godspeed

    Aaron's SL-C build...

    VERY NICE! Looks great!
  13. Godspeed

    0-60 times in SLC

    0-60 one heartbeat ( I have a slow pulse), 1/8 mile 4 heartbeats, 1/4 mile 160 heartbeats ( I get excited when it gets serious)
  14. Godspeed

    Converting RHD SLC to LHD

    Make sure you have the Autoloc controllers accessible for programming
  15. Godspeed

    S2's Build Thread

    Then again they might work well when doing wheelies at night!
  16. Godspeed

    Dan's Build

    Thanks Dan. Great advice!
  17. Godspeed

    Dan's Build

    Dan a while ago you reported that Raptor bedliner worked well for a frit on polycarbonate. Has it held up well? Do you still recommend it?
  18. Godspeed

    Need help registering SLC in CA

    Did you ask RCR if they could contact the original owner to give you permission to use the original bill of sale?
  19. Godspeed

    Air Conditioning Effectiveness

    Dan what is the ambient temp and the duct temps? You should see at least a twenty degree drop.
  20. Godspeed

    FS USA SLC two piece window trade

    Kyle I don't have a set to trade but would be willing to purchase them Thanks