Search results

  1. Dreamcars

    Stephan's SLC Build Log

    Neither, made from 660 steel. Aerospace grade steel with incredible tensile strength. Cheers
  2. Dreamcars

    Stephan's SLC Build Log

    I am currently experimenting with my own racing harness floor anchors and backing plates. Could not find anything I liked on the market, so I make them myself. This is the prototype, should be close to final version. Special version for cars with low ground clearance. Fresh off the lathe and...
  3. Dreamcars

    Stephan's SLC Build Log

    Hello Brian, After a season of local testing I will go in the 750 MPS-AF Class. 750CC + Modified frame and engine, partial streamlining, running on race gas. Cheers
  4. Dreamcars

    Stephan's SLC Build Log

    Hello Markus, I have been SLC sober for 18 month know and not relapsed as of yet touching it. I have acquired some new parts and plan on getting back on it next week with some fresh ideas. I decided to take a long break to pursue a long lived dream on building a Bonneville speed record...
  5. Dreamcars

    Stephan's SLC Build Log

    Hello Aaron, Just get the ICengineworks header kit for the OD of your header tubing and you will be good to go. Very intuitive tool, highly recommended and it worked great for me.
  6. Dreamcars

    New kit car on knock off SLC chassis

    I found it on Ebay. Not sure if they are sold anywhere else. https://www.ebay.com/itm/1900-Replica-Kit-Makes/174548821935
  7. Dreamcars

    New kit car on knock off SLC chassis

    The RAZOR on a knock off SLC chassis. Price for a roller chassis is $10,000 and the body is priced with windows, hinges and tail lights at $12,000. Not a bad looking kit if someone is creative, can come up with an interior and is looking for a different skin.
  8. Dreamcars

    Stephan's SLC Build Log

    Hello Mason, The extras were purchased just in case I have another application that requires high torque and has no room for a nut or enough room to get a wrench on. Cheers
  9. Dreamcars

    Stephan's SLC Build Log

    Hello Mason, The serrated push in bushings are available from IPSCO which makes the cable pull version of the calipers that came with my kit. Mark Johnson at IPSCO will sell them individually for about $3.00. I spent $28.00 for 8 including shipping. His number 303-252-4481 and email...
  10. Dreamcars

    Centroid Fuel Sender

    Hello Dan, I also have the Speedhut gauge with 240/33 Ohm. I had a new level sending unit made by Centroid to match the gauge. The SLC sender matches the Kozo Dash with 100/0 Ohm. I was not sure about the Speedhut being able to digest that. Also the SLC sender has the linearization module built...
  11. Dreamcars

    Ken's SLC build thread

    Super idea.
  12. Dreamcars

    Stephan's SLC Build Log

    Hello Ben, Yes I did. Looked really nice on the inside too. Somewhat very sanitary :)
  13. Dreamcars

    Stephan's SLC Build Log

    Hello Johan, Good point and it hit me early in the layout of the system. Usually headers are being build from the manifolds backwards with the tubes meeting at a certain point to enter a collector. This can carry the risk that if the collectors are not equal or precise enough the inserted tubes...
  14. Dreamcars

    Stephan's SLC Build Log

    New Exhaust System Rev.1, Chapter 6 and final chapter for the headers. The headers are finished and I installed them this evening. I had some concerns about heat deformation with all the welds but it turned out that they fit like a champ. Collectors mated to the rear system and manifolds to the...
  15. Dreamcars

    Accident damaged SLC LT4 project located in Miami, FL

    One of Allan's https://www.gt40s.com/threads/rcr-slc-lt4-for-sale.53493/
  16. Dreamcars

    Accident damaged SLC LT4 project located in Miami, FL

    I found this today. What a shame. Hope that driver and passenger got out safe. Could be a nice project for a talented shop or individual. https://www.iaai.com/vehicledetails/34645426/1
  17. Dreamcars

    Stephan's SLC Build Log

    My Tesla Calipers arrived the other day and I went over to see Jon Haas at Pantera Electronics in Harleysville PA. Lucky me it was only a few towns over and Jon gave me a tour to see his wonderful original 1972 white Pantera. I picked my cable, connectors and push button controller while being...
  18. Dreamcars

    FS USA CABLE SHIFTER FOR GRAZIANO 6-SPEED TRANSAXLE "SOLD"

    I am selling a cable shifter for a Graziano 6-Speed Transaxle. Came with my Superlite SLC. $150.00 plus shipping from Yardley, PA 19067
Top