Search results

  1. Shaun Sizen

    Free - Just Pay Postage - Horn and Hoses

    Afternoon all, Got sent 2 of these by mistake and they did not want it back (Card Builder Solutions) so rather than sit on my shelf anyone want it? Just pay postage, UK only as not worth sending overseas :) Also got these wrong length (by about 10mm Grrrrr) so any use to anyone same deal...
  2. Shaun Sizen

    Ford v Ferrari video James May

    Cracking video
  3. Shaun Sizen

    Southern GT Chassis #54 Build - The What Have I Done Chronicles!!

    Ok one to throw to the group in my build log, getting close to dashboard, now I am aiming to recreate a stripped out look, no carpet, alloy panels and rivets for me!! Looking to fit IDA looking EFi as well just love those trumpets, engine is a period-ish 302 stroked to 331. So do i got period...
  4. Shaun Sizen

    PASS Bout bloody time ...

    Stunning car well done that man, I have all that IVA fun ahead !!
  5. Shaun Sizen

    Wilwood Reservoir Caps

    Cheers Guys Paul my threads did not seem the same but maybe that's because the bottom is fouling so they are not seating proper;ly will have a chop Glenn they do look shorter than mine what are they off? Thanks
  6. Shaun Sizen

    Wilwood Reservoir Caps

    Evening all Any idea where in the UK you can get Wilwood caps with the warning sensors for the 0.625 and 0.75 compact brake reservoirs? I got some generic ones from Car Builder solutions but they don't fit, thread wrong and too tall Cheers
  7. Shaun Sizen

    SouthernGT Number 18

    Got mine and it was too tall but then saw you have sunk the pump into the panel, genius!! I did not like the look of the pump anyway. On your brake fluid caps, did you have to shorten / modify them as mine seem too tall for the Wilwood reservoirs? Only ones I can seem to find....
  8. Shaun Sizen

    SouthernGT Number 18

    Cheers, ally it is then, I have ordered one anyway so I can set the pipes in the right place, will check IVA size and make sure its compliant now
  9. Shaun Sizen

    SouthernGT Number 18

    Slow down I'll never catch you up at your pace :) Quick question is that alloy washer bottle ok for IVA? I have the naff plastic one fitted at the moment as I didn't think the alloy ones were allowed...Until after IVA that is!!!
  10. Shaun Sizen

    Lifting points for 302

    Cheers Dwight much appreciated, was recommended Brodix by the engine guy, glad you have good feedback on them :)
  11. Shaun Sizen

    Lifting points for 302

    Hi Ok need to lift the engine onto the bench, got Brodix heads, no inlet manifold so cannot lift on a card plate, am I able to lift using the heads? Bit worries as they are aluminium? Any idea the bolt size needed if so? On the flywheel end I can for now use the bell housing bolts but once the...
  12. Shaun Sizen

    UK Hose Fitting supplier

    Really good manual explaining it all as well http://anfittingguide.com/wp-content/uploads/2014/01/AN-hose-and-fitting-guide-v21.pdf
  13. Shaun Sizen

    UK Hose Fitting supplier

    Hi Anyone recommend a good supplier of AN hose fittings and hoses in the UK? Getting to a spot of plumbing, starting with the rad line back to the reservoir, on the 40 so need a decent supplier, seem to be a few out there so any advice appreciated especially as I am going EFi so will need a few...
  14. Shaun Sizen

    Air Con Fitting

    Hi Chris Thanks for the info, SGT are moving and then moving again so they are mobbed and did not want to hassle them but Mick did just email tonight with some info, Much apprecited shaun
  15. Shaun Sizen

    Selling immediately after building?

    I'm with Bill on the fun hobby part, the reason(s) I took the plunge were that classic cars now are so much money in the UK so no way could I afford one (mind you a 40 not cheap but the see what you get for your £ / $), the build is as much part of it as the finished product, the build is...
  16. Shaun Sizen

    Southern GT Chassis #54 Build - The What Have I Done Chronicles!!

    Hi Morten, thanks for the input, I have done a full lock to lock and it seems to clear the springs, I was going the other side but it caused the pipe I thought to kink a bit, will take a full check later when up the workshop, Micks latest build it comes out the front of the shocka nd behid the...
  17. Shaun Sizen

    Southern GT Chassis #54 Build - The What Have I Done Chronicles!!

    Quick update, work done since is the fans are now fitted as is the rad, I made up some small brackets to push the fans tight to the rad and also its bolted to the panel top and bottom as I thought one fixing may not be enough? So next was the brake pipes, to keep the flexi away from the...
  18. Shaun Sizen

    Air Con Fitting

    Hi Ok air con time now and have most of it figured out but any guidance would be helpful, so in the SGT kit I have 3 pipe sizes which I will call Small / Medium / Large in my summary below, this is I think what the pipe route plus my questions :) Compressor outlet marked S Large pipe To...
  19. Shaun Sizen

    Southern GT Chassis #54 Build - The What Have I Done Chronicles!!

    Hi Paul, Same industry as me, spent many years in the City plus Brighton (much nicer) at Amex as a consultant, server rooms became my second home and always noted the signs about sirens and escape routes, nver had to use one, did have a whopping earth power surge once at amex that fired so many...
Top