Search results

  1. P

    Aaron's SL-C build...

    Looks awesome. I like the wing set-up.
  2. P

    Aaron's SL-C build...

    Looking good!
  3. P

    Converting RHD SLC to LHD

    What material did you used for filling in the door handles before fiberglassing.
  4. P

    Aaron's SL-C build...

    Awesome Aaron!
  5. P

    Dan's Build

    Could you also send them to me. I’d appreciate it. Thanks
  6. P

    SL-C Owners Map

    Please add one to Manitou Beach, Michigan
  7. P

    A/C will not work

    Dan, what regulator did you use?
  8. P

    A/C will not work

    The inverter was wrong. The clutch and fan came on as soon as I grounded the wire. Thanks Allan. I agree with you Dan, I had installed easier A/C units.
  9. P

    A/C will not work

    Thanks Allan. Will give it a try.
  10. P

    A/C will not work

    Been working trying to resolve an issue with the Vintage A/C unit is not working. The A/C clutch is not engaging and the Infinity Rear power cell light number 10 is not appearing when power is supplied. I have checked for the Inverter in the wiring for the fans control and it is there. I tried...
  11. P

    Etching Logos

    I also would be interested in a VIN plate
  12. P

    Aluminum mesh

    Thanks for the info
  13. P

    Aluminum mesh

    What mesh should I used to cover the airbox and the side inlets? Part number and where to purchase would be appreciated. Thanks
  14. P

    Graziano transaxle retainer clip

    Thanks Kevin. I have it.
  15. P

    Heat shield bracket

    Anyone have a heat shield bracket for the Graziano they want to get rid of? I took mine off and can't find it. It's the bracket on the driver's side of the Transaxle. Thanks
  16. P

    SLC Windshield

    I broke mine and have been waiting for over a year for a replacemen from RCR. I too am looking for a windshield.
  17. P

    Racelogic and gated shifter

    What cables did you use? Ones supplied by Fran or custom cables. If they were custom where did you get them and was there a part number. Thanks
  18. P

    LS3 525hp

    In the March Car and Driver there is a good acticle on a Mazda Miata with the LS3 engine. Very tight fit. In looking at the cold air tubes there is only 2 90 degree silicon tubes. Could there be a different throttle body not requiring the 10 inches for the installation of the mast air sensor...
  19. P

    KOSO

    Before I started the SLC, the KOSO unit was working normal. The turn signals, high beams and I could set-up the engine parameter. Since, the start, the KOSO goes through it start-up function then it just shutdowns. I have checking the 12volt and the ground connections and the KOSO is getting...
Top