Search results

  1. L

    Original P1015 Dash Switch

    Hi All, This attached picture of the original dash in the P1015 has a switch between the toggle switches. Does anyone know what this switch does? Thank you! Louis RCR GT40 MKII
  2. L

    Louis' RCR MKII Build

    Rockers Hi All, Another rocker question for the group. The tires are hitting the rockers even though the rockers as far back as possible and the front suspension as far forward as possible. I've trimmed a little here and there hoping to get them to go back. I've seen some cut the front...
  3. L

    RCR MKII Audi 01E 6-Speed Quaife LSD

    Hi All, I may purchase a 01E 6-speed with a Quaife LSD for my RCR MKII. It will be mated to a 351 W engine. Are there any issues regarding this gearbox in the RCR chassis? I appreciate any advice! Louis
  4. L

    Fuel pick up tubes

    Where do you buy 3/8" NPT to tank fuel pick up tubes? I would prefer the pick up tube to be metal not plastic. The threaded end should be 90 degrees. Thank you, Louis
  5. L

    Brake and Clutch Reservoirs on Original GT40s

    Hello, On some of the original racing GT40s the brake and clutch reservoirs are located just in front of the windshield underneath an access panel. If any of you original owners have such a configuration I would greatly appreciate some pictures of the reservoirs and how they are mounted. I'm...
  6. L

    Owner of GT40 MkII P1015?

    Hello, Is the owner of GT40 MkII P1015 a member of this forum? If not, would anyone have contact information? I would like ask a few questions and hopefully pictures too. Thank you! Louis
  7. L

    Louis' RCR MKII Build

    The adventure has already begun but here are a few pictures of the start. The "Forty", as it's known in the garage, is nesseled between a restored 1961 Renault Beach Car, my rebuilt 1983 Lotus Esprit and you can just see the nose of a Gen V Dodge Viper, affectionately known as the Torque...
  8. L

    RCR MKII Build Dash Question

    Hi Everyone, The RCR MKII I got from Fran was to be a turn-key car for the previous client. Unfortunately, due to unforeseen issues the client was unable to complete the build. So I acquired the car with work already started by RCR. The client wanted the car as period correct as possible...
  9. L

    RCR GT40 Build Table Dimensions and Hello

    Hello Everyone I will be receiving my RCR GT40 MK2 in a few weeks. I noticed in the manual a rolling build table for the chassis. Does anyone know the dimensions of that table or a platform you may have built/bought? It looks like 3ft x 6ft. Scrolling through the manual I didn't...
  10. L

    Hello from Mississippi

    Hello Everyone! I'm exited to begin my adventure building a RCR GT40. I'm very fortunate to get the car from RCR. The original owner was having it built turn-key when he had back surgery and can no longer get into low profile cars. Fran says much has been done to make it period correct...