Search results

Pictures of the engine.

I get pictures up shortly. Sorry.

As many of you know, my coyote engine in my GTR locked up on the dyno at Comp Cams when they were building the electrical harness. I sent the engine back to Ford for inspection and found the problem to be the Derale adaptor was to restrictive to feed oil to the engine. So I have it back and it...

My engine is at Ford right now. I hope to have an answer from them next week as to who is paying for my new engine. The tub is ready to be picked up from the upholstery shop so things can start going back together for the last time.

Sorry guys, I've had a few curves thrown at me and the car has been on the back burner. My wife and I became foster parents for a 17 year old girl about the time I went missing around here. It has been a joy but not without some daily concerns. It is truly heart breaking to see and hear how some...

I don't even know what to say! I've been away for while and just went through this build thread. This is the most incredible build I have seen so far. I love the fabrication of the parts and the use of the oem goodies. Thank you for sharing here on the forum.

Rod, I think so but do you really know? Jet Hot did it.

I'm sorry I haven't been posting much. I have been working on the car quite a bit but I'm at the stage where I have had the body on and off 10 times working on details, I've removed all the wiring I had done to do a cleaner job, the pedals are back out for the same reason. There has been about...

Thanks for the advice. I have another layer of shielding now but it is still probably within 3 inches of the pipe. What do think?

Thanks Joe, I sort of put the cart before the horse on the dash so for those mounting their dash, there will be some updates soon. Bottom line, you want the gauge faces more vertical than if you make the back of the glove box perpendicular to the floor. The front edge of the dash needs to be...

Mark my pedals are stock. No modifications that I can remember. Do you need a better picture of them?

Alright, how many of you get side tracked when you're out in your shop? I know I have been working on wiring but I really don't enjoy that so I was sitting in the car and thought I might just go ahead and mount the pedals. So I did the pedals then I thought I would go ahead and install the...

Here is how I chose to lay out the gauges. Couldn't remember if I had posted this before.

This wiring has been something I have been putting off just because it all looked so dang complicated. Well, I'm here to tell you it is the easiest wiring project I have every had! Now it's not done yet so the jury it still out but it is an incredibly well designed system. I put the gauges...

Mark, your build has been incredible. If I can ever help, send me a note.

When I cut the dash for the gauge cluster it was pretty straight forward. I just traced the gauge bezel and drilled the hole to mount the gauges. From the back you can see the aluminum nut rivots I used to make it easy to get the face off later. The front edge of the dash is...

I was pretty nervous about cutting the dash and if I could do it again I would do it differently so I'll show you how I would have done it. You can simply lay a 2x4 on the back of the glove box recess and level it with the top of the glove box. Where it touches the sides id where you will...

I have the CF10 wheels if your still looking.

Well John you would be right under normal circumstances but it's still in the garage. Matt I sent you an email but I haven't heard back. You are welcome to stop by anytime. Gary is right, I'm waiting on some stuff and I have been extremely busy at the office lately. But I might be holding...

Thanks Larry but you haven't seen anything yet! :thumbsup: